Actions

Difference between revisions of "Pro-106 and Pro-197 CPU/DSP Upgrades"

From The RadioReference Wiki

(Created page with "Please use this article to document all CPU and DSP upgrades for the Radio Shack Pro-197 and Pro-106 scanners. ==Display Current Firmware Level== You can check the firm...")
 
Line 9: Line 9:
 
*DSP AppVer: RF1.4
 
*DSP AppVer: RF1.4
 
*DSP VocVer: RF1.0
 
*DSP VocVer: RF1.0
 +
 +
==CPU 2.0 Upgrade==
 +
Download upgrade: [http://www.radioshack.com/graphics/uc/rsk/Support/SoftwareDownload/2000106_0197_V20.exe here]
 +
Discussion thread: [http://forums.radioreference.com/radio-shack-scanners/230650-pro-106-197-cpu-2-0-released.html here]
 +
 +
===CPU 2.0 fixes===
 +
 +
* Pressing the ATT key during scanning while on a CONV object causes the object
 +
to be stored to EEPROM immediately. This eliminates the possibility of the ATT
 +
status change being lost due to a Priority check.
 +
 +
* Changed 154-156MHz range to accommodate Marine channels
 +
 +
* Added duplicate checking to conventional channels created via PGM NEW CONV
  
 
==CPU 1.9 Upgrade==
 
==CPU 1.9 Upgrade==

Revision as of 09:32, 11 April 2012

Please use this article to document all CPU and DSP upgrades for the Radio Shack Pro-197 and Pro-106 scanners.


Display Current Firmware Level

You can check the firmware version levels by pressing '3' while the scanner's powerup Welcome Message is displayed.

A sample output:

  • uP App Ver: RF1.9
  • DSP AppVer: RF1.4
  • DSP VocVer: RF1.0

CPU 2.0 Upgrade

Download upgrade: here Discussion thread: here

CPU 2.0 fixes

  • Pressing the ATT key during scanning while on a CONV object causes the object

to be stored to EEPROM immediately. This eliminates the possibility of the ATT status change being lost due to a Priority check.

  • Changed 154-156MHz range to accommodate Marine channels
  • Added duplicate checking to conventional channels created via PGM NEW CONV

CPU 1.9 Upgrade

  • Download upgrade here
  • Discussion thread: here

CPU 1.9 fixes

  • Pressing the ATT key during scanning while on a CONV object causes the object to be stored to EEPROM immediately. This eliminates the possibility of the ATT status change being lost due to a Priority check

CPU 1.8 and DSP 1.4 Upgrades

These update utilities have complete update information included; just download and run them -- it's easy.

  • Download CPU upgrade here
  • Download DSP upgrade here
  • Discussion thread: here

CPU 1.8 fixes

  • Adds patch support for P25, Motorola and EDACS trunking
  • Changes CCDump type string to "EDn" if "narrow invert" is turned on
  • Corrects LCD “mirror image” issue

DSP 1.4 fixes

  • Minimizes the possibility of a previous NAC displayed on a new transmission.