Actions

Pro-668

From The RadioReference Wiki

Revision as of 19:20, 4 February 2016 by QDP2012 (talk | contribs) (→‎Technical Issues: added error-code list from thread http://forums.radioreference.com/radio-shack-scanners/328162-pro-668-error-codes.html)

General Info

Catalog #: 2000668

Radio Shack branded version of the Whistler WS1080.

(Functionally the same as the former GRE PSR-800 for the most part as well.)

In the box

  • Pro-668
  • Rubber ducky antenna
  • Interface cable
  • 2GB microSD card (which also contains the Digital iScan software)
  • Belt clip

Technical Issues

Error Codes

Error Code Error Type Suggested Solution
01-00 General heap error Contact GRE Support and provide error code information
01-01 Unable to allocate from heap Contact GRE Support and provide error code information
02-00 Unknown object type in data Use PC Application to delete any corrupted objects or create a new configuration
02-01 Unknown TSYS type in data Use PC Application to delete any corrupted TSYS objects or create a new configuration
03-00 No MicroSD Card inserted Ensure that a properly formatted MicroSD card is fully inserted and locked in the MicroSD slot.
03-01 General error initializing file system Reinsert the MicroSD card to ensure it is fully inserted in locked in the MicroSD slot. If necessary, reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists.
03-02 Cluster size bad Reinsert the MicroSD card to ensure it is fully inserted in locked in the MicroSD slot. If necessary, reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists.
03-03 Error reading MicroSD card Reinsert the MicroSD card to ensure it is fully inserted in locked in the MicroSD slot. If necessary, reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists.
03-04 Error writing MicroSD card Reinsert the MicroSD card to ensure it is fully inserted in locked in the MicroSD slot. If necessary, reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists.
03-05 MicroSD Card is full Reduce size of configuration, remove unnecessary audio recordings or switch to a MicroSD card with more capacity.
03-06 MicroSD Card is write protected Reinsert the MicroSD card to ensure it is fully inserted in locked in the MicroSD slot. If necessary, reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists.
03-07 Mass storage mode is active Under normal conditions this error should not appear. Mass storage device mode is disabled when the scanner is connected to a computer and scanning. Disconnect the radio from the computer, wait a few seconds, then reconnect. Contact GRE Support if the problem persists.
03-08 Unknown MicroSD card read/write error Reinsert the MicroSD card to ensure it is fully inserted in locked in the MicroSD slot. If necessary, reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists.
04-00 Initialization error Contact GRE Support and provide error code information
04-01 Initialization error Contact GRE Support and provide error code information
04-02 Firmware load error Contact GRE Support and provide error code information
05-00 Unable to load CONFIG__.BIN Reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists.
05-01 CONFIG__.BIN file error Reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists.
05-02 CONFIG__.BIN file error Reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists.
05-03 CONFIG__.BIN file error Reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists.

FCC / Technical Data

External Links


Return to Radio Shack Scanners