Difference between revisions of "Radio Shack Scanner Programming Software Support"
From The RadioReference Wiki
| Line 32: | Line 32: | ||
If you imported info into ARC500 and/or uploaded programming to your scanner and you receive the message "Nothing Enabled" on your radio, you need to assign the frequencies or talkgroups to a "scanlist". This can be done easily in the software by going to the scanlist column next to the alpha tag column, in either Coventional or Talkgroup under Scannable Objects, and typing in the scanlist number. When each frequency and/or talkgroup has been assigned a scanlist you can then proceed with uploading the information to the scanner. | If you imported info into ARC500 and/or uploaded programming to your scanner and you receive the message "Nothing Enabled" on your radio, you need to assign the frequencies or talkgroups to a "scanlist". This can be done easily in the software by going to the scanlist column next to the alpha tag column, in either Coventional or Talkgroup under Scannable Objects, and typing in the scanlist number. When each frequency and/or talkgroup has been assigned a scanlist you can then proceed with uploading the information to the scanner. | ||
| + | |||
| + | * [http://wiki.radioreference.com/index.php/ARC500 ARC500 software User Guide] | ||
== Video Tutorials == | == Video Tutorials == | ||
Revision as of 22:12, 3 January 2011
Contents
Installation and Use
See this PDF document tutorial which walks the user through the download, installation, and initial programming process.
Scanner Master also has a helpful page with information on installing and using the Radio Shack Programming Software
USB Cable Driver Installation
See this PDF document which walks the user through the driver installation for the cable
Registering Your Software
After purchasing your software, you should receive your license keys via email at the address you registered with. Follow these steps to register your software.
- Click START > PROGRAMS > SCANNER SOFTWARE > [Your Scanner Model]. This will start the software.
- Confirm the demo message and then choose the menu item HELP > REGISTER.
- Enter both keys ( Key1 and Key2) you received via email and click OK.
- Close the software and then restart by following the first step in this list.
- Your software should now be registered
Please note that the keys are case sensitive and must be entered with the dashes.
Common Questions and Issues
- I am receiving a "Nothing Enabled Error" after programming my radio
If you imported info into ARC500 and/or uploaded programming to your scanner and you receive the message "Nothing Enabled" on your radio, you need to assign the frequencies or talkgroups to a "scanlist". This can be done easily in the software by going to the scanlist column next to the alpha tag column, in either Coventional or Talkgroup under Scannable Objects, and typing in the scanlist number. When each frequency and/or talkgroup has been assigned a scanlist you can then proceed with uploading the information to the scanner.
Video Tutorials
Contact
If you need support via email, please contact the Radio Shack Scanner Programming Support Team at:
radioshack@radioreference.com