Actions

SC230

From The RadioReference Wiki

Revision as of 23:48, 27 March 2007 by Trunker (talk | contribs)
SC230


Uniden's portable Racing scanner with Dynamic Memory Architecture.

Specifications

Limits

  • Channels: 1600 typical, 2500 maximum
  • Systems: 200 maximum
  • Groups per system: 20 maximum
  • Scan Rate: 100 channels per second (conventional mode)
  • System Quick Key range: 1-9
  • Group Quick Key range: 0-9
  • Custom Search Ranges: 10
  • Preprogrammed Service Search Bands: 10

Frequency Coverage

  • 25-54 MHz
  • 108-174 MHz
  • 216-225 MHz
  • 400-512 MHz
  • 806-956 MHz
  • 1240-1300 MHz

Features

  • Race Track Operation - Easily program and select the race and drivers you want to listen to
  • Preprogrammed with Major Racing Frequencies - You'll be ready to listen when they're ready to roll
  • Quick Car Select – you can select and listen to a car by pressing a single key
  • Quick Race Programming – lets you quickly and easily enter information about a specific race
  • Close Call
  • Supported step sizes: 5, 6.25, 7.5, 10, 12.5, 15, 20, 25, 50 or 100 kHz
  • SAME Weather Alert
  • DCS/CTCSS Rapid Decode
  • 16 character text tagging for each system, group, channel, search range, and SAME group
  • LCD Backlight
  • Quick Search
  • 10 Service Searches - public safety, news, amateur radio, marine, railroad, air, CB radio, FRS/GMRS, racing, and special (Itinerant)
  • Custom Search — lets you program up to 10 search ranges
  • Search and Store Operation - Automatically stores found frequencies in custom searches or service searches
  • SAME Weather Alert
  • Weather Priority
  • Priority Scan with Priority Plus
  • Adjustable (0-5 sec) scan delay
  • Strong signal attenuation
  • Upgradeadable firmware
  • Channel Alert
  • Repeater Reverse
  • Pager Screen – ignores hits generated by common pager frequencies while using the Close Call or search features
  • Quick Recall – quickly navigates to a specific Channel by choosing the System, Group, and Channel.
  • Duplicate Input Alert
  • Data Skip
  • Key Lock
  • Battery saver
  • PC Control - Includes a PC Cable So You Can Transfer Information into Your Scanner Using Your Computer
  • Wired Cloning
  • On-Air Programming - (separate transmitter required) Makes programming multiple units a snap - just transmit the driver information using a PC and transceiver, and all scanners update at once
  • Power requirements: 2 AA batteries, 6V DC, or 500mA AC adapter
  • Antenna Connector: BNC

Reviews and User Opinions

Related Pages

Supporting Software

Yahoo Groups and Message Boards (software and receiver support)

eBay Listings


Return to Uniden Scanners