Actions

Difference between revisions of "Sandbox"

From The RadioReference Wiki

 
Line 1: Line 1:
 
== Misc. Information ==
 
== Misc. Information ==
 +
Finding LTR LCN order
 +
*The PRO-97 has a feature that will tell you what the proper channel number for an LTR system is. Program a frequency from the system in the first channel (steps 1-6), set the mode for LTR (step 7), put the scanner in manual, and when you hear a transmission, there will be a number in the lower right corner of the display like "R03" or whatever. This is the LCN (Logical Channel Number) of that frequency. If it is "R03", you would re-program that frequency into channel number x03 of whatever bank you are going to use. Continue the above procedure until you have all the numbers for all the frequencies in the system, keeping in mind that some numbers might be skipped over, example, there may be no channel R02 in your particular system.

Revision as of 21:23, 12 July 2006

Misc. Information

Finding LTR LCN order

  • The PRO-97 has a feature that will tell you what the proper channel number for an LTR system is. Program a frequency from the system in the first channel (steps 1-6), set the mode for LTR (step 7), put the scanner in manual, and when you hear a transmission, there will be a number in the lower right corner of the display like "R03" or whatever. This is the LCN (Logical Channel Number) of that frequency. If it is "R03", you would re-program that frequency into channel number x03 of whatever bank you are going to use. Continue the above procedure until you have all the numbers for all the frequencies in the system, keeping in mind that some numbers might be skipped over, example, there may be no channel R02 in your particular system.