Actions

Difference between revisions of "Search with Scan"

From The RadioReference Wiki

Line 1: Line 1:
Applies to: [[BR330T]] [[BCD396XT]] [[BC346XT]] [[BCD436HP]] [[BCD325P2]] [[SDS100]] [[BCD996T]] [[BCT15]] [[BCD996XT]] [[BCT15X]] [[BCD996P2]]
+
Applies to: [[BR330T]] [[BCD396XT]] [[BC346XT]] [[BCD436HP]] [[BCD325P2]] [[SDS100]] [[BCD996T]] [[BCT15]] [[BCD996XT]] [[BCT15X]] [[BCD996P2]] [[BCD536HP]]
 
-----------------------------------------
 
-----------------------------------------
 
==BR330T==
 
==BR330T==

Revision as of 18:52, 7 May 2021

Applies to: BR330T BCD396XT BC346XT BCD436HP BCD325P2 SDS100 BCD996T BCT15 BCD996XT BCT15X BCD996P2 BCD536HP


BR330T

  • Press and hold Func then press Scan/Srch. At 'Quick Search?' press (.)no.
    • Or, Press Menu. Scroll to 'Search For...' and press E/yes.
  • Scroll to 'Edit Service' and press E/yes.
  • Scroll to the service search you want to edit and press E/yes.
  • Scroll to Set Delay Time and press E/yes.
  • Scroll to 1, 2, 3, 4, 5, seconds or Off to set delay and press E/yes.
  • Scroll to Set Attenuator and press E/yes.
  • Scroll to On or Off and press E/yes.
  • Scroll to Search with Scan and press E/yes.
  • Scroll to Set Lockout and press E/yes. (Used for 'Search with Scan' only).
  • Scroll to 'Unlocked', 'Temporary L/O', or 'Lockout' and press E/yes to save and exit.
  • Scroll to Set Hold Time (the amount of time the search will search in Scan Mode) and press E/yes.
  • Enter the hold time (0-255 seconds) you desire and press E/yes to save and exit.
  • Press Menu and scroll to another service search and repeat the previous steps or press L/O to exit.

BCD396XT

BC346XT

BCD436HP

BCD325P2

SDS100

BCD996T

BCT15

BCD996XT, BCD996P2

BCT15X

Credit Easier to Read manual