Difference between revisions of "Search with Scan"

@@ Line 2: / Line 2: @@
 -----------------------------------------
 ==BR330T==
-* ''Press and hold'' Func then press Scan/Srch. At 'Quick Search?' press (.)no.
+* Defined as part of the service search in the [http://new.marksscanners.com/330/330.shtml#service%20search Easier to Read BR330T Manual]
-**Or, Press Menu. Scroll to 'Search For...' and press E/yes.
-*Scroll to 'Edit Service' and press E/yes.
-*Scroll to the service search you want to edit and press E/yes.
-*Scroll to Set Delay Time and press E/yes.
-*Scroll to 1, 2, 3, 4, 5, seconds or Off to set delay and press E/yes.
-*Scroll to Set Attenuator and press E/yes.
-*Scroll to On or Off and press E/yes.
-*Scroll to '''Search with Scan''' and press E/yes.
-*Scroll to Set Lockout and press E/yes. (Used for 'Search with Scan' only).
-*Scroll to 'Unlocked', 'Temporary L/O', or 'Lockout' and press E/yes to save and exit.
-*Scroll to Set Hold Time (the amount of time the search will search in Scan Mode) and press E/yes.
-*Enter the hold time (0-255 seconds) you desire and press E/yes to save and exit.
-*Press Menu and scroll to another service search and repeat the previous steps or press L/O to exit.
 ==SDS100, SDS200==

Revision as of 15:36, 8 May 2021