Actions

Difference between revisions of "Software Support for Uniden Rebanding"

From The RadioReference Wiki
Line 24: Line 24:
 
|}
 
|}
  
−
As of this writing, the following software packages are known to support rebanding;
+
As of this writing, the following software packages are known to support rebanding. Note the scanners currently supported; all packages are expected to be upgraded for other scanners when Uniden releases the firmware.
  
 
* [http://scannow.org FreeScan]
 
* [http://scannow.org FreeScan]
 +
** '''Currently Supported: ''' BCD396, 996, 246, and BCT15 
 
* [http://www.scannersoft.com Scan Control (version 7.0)]
 
* [http://www.scannersoft.com Scan Control (version 7.0)]
 +
** '''Currently Supported: ''' BCD396 and 996 
 
* [http://www.proscan.org ProScan (version 1.82)]
 
* [http://www.proscan.org ProScan (version 1.82)]
 +
** '''Currently Supported: ''' BCD396, 996 and BCT15 
 
* ARC396 (version 3.0 - available from Scanner Master)
 
* ARC396 (version 3.0 - available from Scanner Master)
  

Revision as of 09:56, 22 January 2009

Please use this article to document how to enter the Rebanding changes outlined below in the various software packages that support Uniden scanners.

Band Plan Base Freq (lower) Base Freq (upper) Offset Polarity Spacing
1 851.025 854.000 440 + 25 khz
2 851.0125 868.9875 0 + 25 khz

As of this writing, the following software packages are known to support rebanding. Note the scanners currently supported; all packages are expected to be upgraded for other scanners when Uniden releases the firmware.

The following BuTel packages are expected to be available in February, per their website;

  • ARC15
  • ARC996
  • ARC246

FreeScan

File:Freescan trunk site.JPG
Site screen with bandplan

To access this screen, change the site type to Mot Custom/Reband

Return to the Uniden DMA FAQ

Retrieved from "https://wiki.radioreference.com/index.php?title=Software_Support_for_Uniden_Rebanding&oldid=25945"