Software Support for Uniden Rebanding

Please use this article to document how to enter the Rebanding changes outlined below in the various software packages that support Uniden scanners.

Band Plan	Base Freq (lower)	Base Freq (upper)	Offset	Polarity	Spacing
1	851.025	854.000	440	+	25 khz
2	851.0125	868.9875	0	+	25 khz

As of this writing, the following software packages are known to support rebanding. Note the scanners currently supported; all packages are expected to be upgraded for other scanners when Uniden releases the firmware.

• FreeScan
  • FreeScan User Guide
  • Currently Supported: BCD396, BCD996, BC246, BCT15, BCD396XT, BC346XT

• Scan Control
  • Currently Supported: BCD396, BCD996, BCT15,BC246T.BC898T,BCT8,BR330T,BC296D,BC796D

• ProScan
  • Currently Supported: BCD396, 996, BCT15, BC296D, BC796D, BCD396XT, BC346XT

• BuTel Software
  • ARC996
  • ARC246
  • ARC15
  • ARC330 ?rebanding support unknown
  • ARC250 ?rebanding support unknown
  • ARC898 ?rebanding support unknown
  • ARC8 ?rebanding support unknown
  • ARC-XT (for the Uniden XT DMA scanners) ?rebanding support unknown

FreeScan

Site screen with bandplan

To access this screen, change the site type to Mot Custom/Reband. If you are using the RR Trunk Import, and the rebanded flag has been turned on in the database, FreeScan automatically adds the appropriate values into the table.

Return to the Uniden DMA FAQ