Actions

Difference between revisions of "Software Support for Uniden Rebanding"

From The RadioReference Wiki

Line 1: Line 1:
 
Please use this article to document how to enter the [[Rebanding]] changes outlined below in the various software packages that support Uniden scanners.  
 
Please use this article to document how to enter the [[Rebanding]] changes outlined below in the various software packages that support Uniden scanners.  
  
 +
==General==
 +
* XT version scanners already have the firmware updates to support rebanding. Non-XT scanners will need to undergo the appropriate firmware updates.
 +
<br>
 
{| border="1" cellpadding="3" style="vertical-align:top;BORDER-COLLAPSE: collapse" colspan="2"     
 
{| border="1" cellpadding="3" style="vertical-align:top;BORDER-COLLAPSE: collapse" colspan="2"     
 
! Band Plan   
 
! Band Plan   

Revision as of 12:57, 9 August 2009

Please use this article to document how to enter the Rebanding changes outlined below in the various software packages that support Uniden scanners.

General

  • XT version scanners already have the firmware updates to support rebanding. Non-XT scanners will need to undergo the appropriate firmware updates.


Band Plan Base Freq (lower) Base Freq (upper) Offset Polarity Spacing
1 851.025 854.000 440 + 25 khz
2 851.0125 868.9875 0 + 25 khz

As of this writing, the following software packages are known to support rebanding.

  • BC246.TCL for the BC246- Macs, Unix and Windows (TCL/TK) support - freeware
  • BuTel Software
    • ARC396
    • ARC996
    • ARC246 (as of version 3.1)
    • ARC15 (as of version 3)
Unknown Rebanding Support

Additional Information requested...

  • BuTel Software
    • ARC330
    • ARC250 (for the BC296 and BC796 only)
    • ARC898
    • ARC8
    • ARC-XT (for the Uniden XT DMA scanners)
  • Trunkstar All Products

FreeScan

To access this screen, change the site type to Mot Custom/Reband. If you are using the RR Trunk Import, and the rebanded flag has been turned on in the database, FreeScan automatically adds the appropriate values into the table.

ProScan

  • NOTE: Although ProScan supports the BC250/785, rebanding is not supported in these models.

BC296/796D

  1. On the 'Database' Row, click on 'Trunk Bank Settings' (figure 1)
  2. Fill in the values as shown (figure 2)

DMA Scanners

  1. Below the Systems tab, hit 'Add' (figure 1)
  2. On the System pulldown, select 'MOT 800 Mhz Custom' (figure 2)
  3. In the System tree, click on the system name. Figure 3 results (partially shown to conserve space)
  4. Click on the 'Band Plan' button
  5. Fill in the data as shown (figure 4)


Return to the Uniden DMA FAQ