Software Support for Uniden Rebanding

Please use this article to document how to enter the Rebanding changes outlined below in the various software packages that support Uniden scanners.

Band Plan	Base Freq (lower)	Base Freq (upper)	Offset	Polarity	Spacing
1	851.025	854.000	440	+	25 khz
2	851.0125	868.9875	0	+	25 khz

As of this writing, the following software packages are known to support rebanding. Note the scanners currently supported; all packages are expected to be upgraded for other scanners when Uniden releases the firmware.

• FreeScan
  • FreeScan User Guide
  • Currently Supported: BCD396, 996, 246, and BCT15
• Scan Control (version 7.0)
  • Currently Supported: BCD396 and 996
• ProScan (version 1.83)
  • Currently Supported: BCD396, 996 and BCT15
• ARC396 (version 3.0 - available from Scanner Master)

The following BuTel packages are expected to be available in February, per their website;

• ARC15
• ARC996
• ARC246

FreeScan

File:Freescan trunk site.JPG

Site screen with bandplan

To access this screen, change the site type to Mot Custom/Reband

Return to the Uniden DMA FAQ