Actions

Software Support for Uniden Rebanding

From The RadioReference Wiki

Revision as of 13:47, 5 April 2009 by Ka3jjz (talk | contribs)

Please use this article to document how to enter the Rebanding changes outlined below in the various software packages that support Uniden scanners.

Band Plan Base Freq (lower) Base Freq (upper) Offset Polarity Spacing
1 851.025 854.000 440 + 25 khz
2 851.0125 868.9875 0 + 25 khz

As of this writing, the following software packages are known to support rebanding. Note the scanners currently supported; all packages are expected to be upgraded for other scanners when Uniden releases the firmware.

  • FreeScan
  • Scan Control
    • Currently Supported: BCD396 and 996
  • ProScan
    • Currently Supported: BCD396, 996, BCT15, BC296D, BC796D, BCD396XT, BC346XT
  • ARC396 (version 3.0 - available from Scanner Master)
  • ARC996 (same)
  • ARC246 (same)
  • ARC15 (same)


  • BCTool not yet supported, but is expected to be in the near future

FreeScan

Site screen with bandplan

To access this screen, change the site type to Mot Custom/Reband

Return to the Uniden DMA FAQ