Software Support for Uniden Rebanding
From The RadioReference Wiki
Revision as of 05:39, 13 April 2009 by Butelsoftware (talk | contribs)
Revision as of 05:39, 13 April 2009 by Butelsoftware (talk | contribs)
Please use this article to document how to enter the Rebanding changes outlined below in the various software packages that support Uniden scanners.
Band Plan | Base Freq (lower) | Base Freq (upper) | Offset | Polarity | Spacing |
---|---|---|---|---|---|
1 | 851.025 | 854.000 | 440 | + | 25 khz |
2 | 851.0125 | 868.9875 | 0 | + | 25 khz |
As of this writing, the following software packages are known to support rebanding. Note the scanners currently supported; all packages are expected to be upgraded for other scanners when Uniden releases the firmware.
- FreeScan
- FreeScan User Guide
- Currently Supported: BCD396, BCD996, BC246, BCT15, BCD396XT, BC346XT
- Scan Control
- Currently Supported: BCD396 and 996
- ProScan
- Currently Supported: BCD396, 996, BCT15, BC296D, BC796D, BCD396XT, BC346XT
- ARC396
- ARC996
- ARC246
- ARC15
- BCTool not yet supported, but is expected to be in the near future
FreeScan
To access this screen, change the site type to Mot Custom/Reband
Return to the Uniden DMA FAQ