Actions

Difference between revisions of "Spectrum Sweeper"

From The RadioReference Wiki

m (updated categories)
 
(5 intermediate revisions by 4 users not shown)
Line 1: Line 1:
==Preliminary Information, Subjet to change==
+
Spectrum Sweeper allows you to watch for near-field activity on selected frequency bands or Police/Fire frequency bands only.
  
Spectrum Sweeper allows you to watch for near-field activity on all band frequencies or Police/Fire frequencies only. You can also turn on/off frequency sub-bands using the corresponding number keys.
+
Spectrum Sweeper will work in the background ''if'' you program it as an object in the PSR500/600/310/410 only.
 
 
Spectrum Sweeper will work in the background like Signal Stalker I (Uniden OEM) or Close Call (Uniden) and can be used with the "FIND" command.
 
  
 
Once an active frequency is found, the transmission is played through your scanner’s speaker, and you can quickly store it in any of your scanner’s memory locations.
 
Once an active frequency is found, the transmission is played through your scanner’s speaker, and you can quickly store it in any of your scanner’s memory locations.
  
Spectrum Sweeper functions by rapidly sweeping through the RF spectrum in 1 MHz segments. If RF signal energy is detected in a 1 MHz segment, Signal Stalker II will sweep through the 1 MHz
+
Spectrum Sweeper functions by rapidly sweeping through the RF spectrum in 1 MHz segments. If RF signal energy is detected in a 1 MHz segment, Spectrum Sweeper will sweep through the 1 MHz
 
segment in finer steps until the source of the RF signal energy is found.
 
segment in finer steps until the source of the RF signal energy is found.
  
 
You can change the normal Spectrum Sweeper operation to the ''Special'' Spectrum Sweeper operation. If you lock out 5 frequencies within a 1 MHz segment, the scanner will skip that segment in subsequent sweeps.
 
You can change the normal Spectrum Sweeper operation to the ''Special'' Spectrum Sweeper operation. If you lock out 5 frequencies within a 1 MHz segment, the scanner will skip that segment in subsequent sweeps.
  
The menu function has built in help.
+
Available on the  [[PSR-700]], [[PSR-800]], [[PSR-310]], [[PSR-410]], [[PSR-300]], [[PSR-400]], [[PSR-500]], [[PSR-600]], and [[PSR-100]].
  
Available on the [[PSR-600]], [[PSR-500]], [[PSR-400]], [[PSR-300]], and [[PSR-100]].
+
Return to [[GRE Scanners]]
  
Return to [[GRE Radios]]
+
[[Category:RR Glossary]]
 +
[[Category:Scanners Glossary]]
 +
[[Category:GRE Scanners]]
 +
[[Category:Radio Shack Scanners]]
 +
[[Category:Whistler Scanners]]

Latest revision as of 07:19, 11 March 2016

Spectrum Sweeper allows you to watch for near-field activity on selected frequency bands or Police/Fire frequency bands only.

Spectrum Sweeper will work in the background if you program it as an object in the PSR500/600/310/410 only.

Once an active frequency is found, the transmission is played through your scanner’s speaker, and you can quickly store it in any of your scanner’s memory locations.

Spectrum Sweeper functions by rapidly sweeping through the RF spectrum in 1 MHz segments. If RF signal energy is detected in a 1 MHz segment, Spectrum Sweeper will sweep through the 1 MHz segment in finer steps until the source of the RF signal energy is found.

You can change the normal Spectrum Sweeper operation to the Special Spectrum Sweeper operation. If you lock out 5 frequencies within a 1 MHz segment, the scanner will skip that segment in subsequent sweeps.

Available on the PSR-700, PSR-800, PSR-310, PSR-410, PSR-300, PSR-400, PSR-500, PSR-600, and PSR-100.

Return to GRE Scanners