Difference between revisions of "TrunkTracker IV"
From The RadioReference Wiki
(trunktracker3&5) |
m (clean up poor english, correct errors) |
||
| (7 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
| − | Uniden's implementation of trunked two-way radio system monitoring in a scanner. Update to their [[TrunkTracker III]], precursor to [[TrunkTracker V]] | + | Uniden's implementation of trunked two-way radio system monitoring in a scanner. Update to their [[TrunkTracker III]], precursor to [[TrunkTracker V]]. The [[BC296D]] / [[BC796D]] models still use the Bank method, except for Trunked Radio Systems are entered into a Bank and Sub-Bank layout, with Talkgroups laid out in 10 groups of 10 per Trunked Radio System with x-1 being the Priority TGIDs. Both are [[Rebanding]] supported but the optional P25i card must be installed to receive P25 CAI . The [[BCD396T]] / [[BCD996T]], [[BCD396XT]] / [[BCD996XT]] and the [[HomePatrol-1]]. Colloquially called, (in the order listed) the x96D - but not normally, the T's and/or XTs and sometimes refer to as T/XT line, or HP-1, respectively. All are [[Rebanding]] supported, and do support up-to Phase I Digital voice (P25 CAI) decoding of transmissions. |
| − | TrunkTracker IV can follow transmissions | + | |
| − | * [[Motorola]] | + | |
| − | ** [[Type | + | TrunkTracker IV can follow transmissions Trunked Radio Systems: |
| − | ** [[Type II]] | + | ;System Types |
| − | ** [[Type | + | *Conventional Frequencies |
| − | ** [[ | + | * [[Motorola Type I]] |
| − | * [[EDACS]] | + | * [[Motorola Type II]] |
| − | * [[LTR]] | + | ** [[Motorola Type IIi Hybrid| Hybrid]] |
| − | + | ** [[Motorola Type II Smartnet| Smartnet]] | |
| + | ** [[Motorola Type II SmartZone| SmartZone]] | ||
| + | *** [[Motorola Type II SmartZone OmniLink| SmartZone Omnilink]] | ||
| + | * [[EDACS]] | ||
| + | ** [[EDACS Standard| Standard]] (FM-Wide) | ||
| + | *** Networked | ||
| + | ** [[EDACS Narrowband| Narrowband]] (NFM-Narrow) | ||
| + | *** [[EDACS Narrowband Networked| Networked]] | ||
| + | ** [[EDACS SCAT| SCAT]] | ||
| + | ** [[ESK]] | ||
| + | ** [[EDACS Provoice| ProVoice]] <sup>1</sup> | ||
| + | * [[LTR Standard]] | ||
| + | * [[APCO Project 25]] Standard | ||
| + | ** [[APCO Project 25#Project 25 Phases| Phase I '''ONLY''']] | ||
| + | |||
| + | ;System Voices | ||
* Analog | * Analog | ||
| − | * | + | * EDACS |
| + | **Analog ONLY | ||
| + | *[[P25 CAI|P25 Common Air Interface]] | ||
| + | **Phase I '''ONLY''' | ||
| + | |||
| + | |||
| + | |||
| + | |||
[[Category:RR Glossary]] | [[Category:RR Glossary]] | ||
[[Category:Scanners Glossary]] | [[Category:Scanners Glossary]] | ||
[[Category:Trunktracking Glossary]] | [[Category:Trunktracking Glossary]] | ||
| + | [[Category:Uniden Scanners]] | ||
Revision as of 07:56, 1 September 2017
Uniden's implementation of trunked two-way radio system monitoring in a scanner. Update to their TrunkTracker III, precursor to TrunkTracker V. The BC296D / BC796D models still use the Bank method, except for Trunked Radio Systems are entered into a Bank and Sub-Bank layout, with Talkgroups laid out in 10 groups of 10 per Trunked Radio System with x-1 being the Priority TGIDs. Both are Rebanding supported but the optional P25i card must be installed to receive P25 CAI . The BCD396T / BCD996T, BCD396XT / BCD996XT and the HomePatrol-1. Colloquially called, (in the order listed) the x96D - but not normally, the T's and/or XTs and sometimes refer to as T/XT line, or HP-1, respectively. All are Rebanding supported, and do support up-to Phase I Digital voice (P25 CAI) decoding of transmissions.
TrunkTracker IV can follow transmissions Trunked Radio Systems:
- System Types
- Conventional Frequencies
- Motorola Type I
- Motorola Type II
- EDACS
- LTR Standard
- APCO Project 25 Standard
- System Voices
- Analog
- EDACS
- Analog ONLY
- P25 Common Air Interface
- Phase I ONLY