Trunktrackers and STARS
From The RadioReference Wiki
The system's database entry can be found here
- This system requires Win96 Version 1.53 or above to set the correct 2.50kHz Step. Note: Step 2.50kHz cannot be set with scanner keyboard. In Win96, check Multi table bullet under MOT 9600 CC, then click Extended Tables bar. Enter data in # 00, 01 & 02 as indicated - Identifiers 03 through 05 will be ignored by scanner.
- Note: Do not check any Standard Plans Bullets.
GRE Based Scanners (no SD Card)
The picture below comes from WIN500, and is usable on the following scanners;
|GRE Model||Older RS Model||Newest RS Model||Whistler Model|
- Trunking w/ Analog Voice Only scanners, others shown in table can handle up-to Digital P25 Phase I
Note: Neither the PSR-310 nor the PSR-410 can copy STARS as these scanners are analog only
- Stars Thread - about the bandplan