Difference between revisions of "UniTrunker"

From The RadioReference Wiki

Line 140: Line 140:
<b>Q: ''Will this work on Windows? If so, what version?''</b>
<b>Q: ''Will this work on Windows? If so, what version?''</b>
A: Yes - Windows 95 (with IE4 or later), Windows 98, ME, 2K, and XP (all flavors).
A: Yes - Windows 95 (with IE4 or later), Windows 98, ME, 2K, XP, Vista & Windows 7 (all flavors).
<b>Q: ''What types of trunked radio systems can I monitor?''</b>
<b>Q: ''What types of trunked radio systems can I monitor?''</b>

Revision as of 05:05, 16 January 2010

Unitrunker Screenshot monitoring a Motorola system


UniTrunker supports control channel monitoring for the following trunking types:

UniTrunker also supports downloading system information from the Web Service.

UniTrunker generally does not currently support Passport or MultiNet. LTR support is limited to operation with a PSR-500 or PSR-600.

UniTrunker cannot monitor or decode conventional P25 data or audio.

Support can be found on the Trunking decoders forum

What Can UniTrunker Display?

  • Basic system information - system type, system id, talkgroups, and radio ids.
  • Basic site information - site or cell number, and list of channels.
  • Site call activity - who's talking, on what channel, and to whom.
  • Neighboring Site information - list adjacent cell or sites with control channels.
  • User roaming - what radios are registed to a particular site.
  • User affiliation - what talkgroup a user has requested.
  • Patches - a dispatcher initiated action that joins two or more talkgroups together.

This program replaces a previous generation of UniTrunker (Retro).




Public Alpha - released October 2009 (Version

What are the Call Types available?

Colum "T" = "Type" which would be [G]roup or [I]individual (iCall)

Colum "CT" = "Call Type" - See below

For EDACS systems:

Fon - Telephone call

Tst - LCN tester

Dat - Data call

Ana - Analog Voice Call

Emg - Emergency Analog Voice Call

Dig - Digital (ProVoice or Aegis) Voice Call

EmD - Emergency Digital Voice Call

For Motorola:

(Note that these follow the TG+n values in order.)

(none) - Analog voice call

All - All talkgroup (analog)

Em - Emergency (analog)

XP - Crosspatch (analog)

EXP - Emergency Cross Patch (analog)

EMS - Emergency Multiselect (analog)

? - Reserved

MS - Multi Select (analog)

Dig - Digital voice call

DAT - Digital All Talkgroup

DEm - Digital Emergency

DXP - Digital Crosspatch

DEX - Digital Emergency Crosspatch

DEM - Digital Emergency Multiselect

? - Reserved

DMS - Digital Multi-select

For P25 systems:

P25 call type is the call's priority - a single digit from 1 to 7. "4" is the default normal priority.

Emergency calls prefix this digit with the letter "E".

Frequently Asked Questions

Q: Do I need a radio with discriminator tap?

A: The short answer - Yes. The long answer - You may be able to decode 3600 baud Motorola control channels with a 50-70% decode rate without a discriminator tap. This is totally dependent upon the scanner/receiver and sound card you are using. You will not be able to decode EDACS, or APCO Project 25 without a discriminator tap. MPT1327 is the exception. It generally decodes equally well with speaker audio or discriminator audio.

Q: Do I need a slicer?

A: No.

Q: Will the GRE, Uniden, and RadioShack radios with data port work with UniTrunker?

A: With the GRE PSR-500 and PSR-600 as well as the Radio Shack Pro-106 and Pro-197 you do not need a discriminator tap; the program reads through a USB cable attached to the radios' PC/IF data port. UniTrunker has support for EDACS, Motorola and P25 systems with the GRE PSR500/600, RadioShack Pro-106/197, and Uniden BCD396XT/BCD996XT . Also Motorola and EDACS support for the BC346XT and BCT15X Control channel output and rumored to support the RadioShack Pro-107 iScan. The support for the Uniden XT models started working at version

Q: How do I get the Uniden XT models to work on UniTrunker?

A: The trunked system needs to be programmed into a System. Enable the Control Channel Output in the Settings (Extended is not needed). Press HOLD on the system, the control channel should be displayed along with the SysID on the radio, run UniTrunker using the BCD396XT radio setting, set the data source to inline and signal, set the com port to the correct one, as well as the port attributes (baud rate, Data bits, stop bits, parity), set the radio run to running. The trunked system should start displaying data in UniTrunker automatically if your settings are correct and the control channel is active.

You can verify if your radio is sending the data using a terminal program such as Windows Hyperterm to see if your radio output is set correctly.

Q: Will this work on Windows? If so, what version?

A: Yes - Windows 95 (with IE4 or later), Windows 98, ME, 2K, XP, Vista & Windows 7 (all flavors).

Q: What types of trunked radio systems can I monitor?

A: APCO Project 25, EDACS, LTR (with supported radio), Motorola, and MPT1327.

Q: How can I use this to listen to calls on a trunked radio system?

A: You need a second radio that accepts computer control to tune to voice calls as they occur.

Q: Does the program permit downloading talkgroup information from the Web Service?

A: Yes - you can download Motorola and APCO P25 systems by trunking system ID. You can download EDACS by looking up the RR DB SID (that's the ID # assigned by the database to each trunked system). You must be a paid member with a valid user id for this feature.

Q: Can I import my trunker data files?

A: Yes - read the Hints section of the documentation that describes how to do this.

Q: How much does it cost?

A: Nothing. As long as you follow the license and copyright notice - the program is free. No registration either.

See also