Actions

Difference between revisions of "Uniden Digital AGC Tweak Procedures"

From The RadioReference Wiki

m (BCD396T AGC Tweak Procedures moved to Uniden Digital AGC Tweak Procedures: Duplicate pages; rename to common name and point all links to the commonly named page)
Line 1: Line 1:
−
Here is the procedure for tweaking the AGC digital/analog settings for the BCD396T.
+
Here is the procedure for tweaking the AGC digital/analog settings for the [[BCD396T]] and [[BCD996T]].
  
 
'''NOTE! You MUST have digital AGC set to ON for the digital tweak to work.''' ''' To adjust the analog AGC, Turn the digital AGC OFF, Make sure analog AGC is ON, then follow the same steps below, but be sure to remember to turn digital AGC back ON when finished. All settings are saved, even when you cycle power, and the option is no longer available until you access it again.
 
'''NOTE! You MUST have digital AGC set to ON for the digital tweak to work.''' ''' To adjust the analog AGC, Turn the digital AGC OFF, Make sure analog AGC is ON, then follow the same steps below, but be sure to remember to turn digital AGC back ON when finished. All settings are saved, even when you cycle power, and the option is no longer available until you access it again.
  
−
*1. Power on the 396T while pressing the HOLD/RESUME button. You'll hear a "beep beep" letting you know the AGC tweak menu is enabled. The display will then appear as normal.
+
# Power on the 396T while pressing the HOLD/RESUME button.
−
*2. Press in the function knob. WHILE THE F IS FLASHING IN THE UPPER LEFT OF THE DISPLAY, press the volume knob ONCE.
+
#*Depending on model, you will hear two beeps ''OR'' the display will flash to indicate that the AGC tweak menu is enabled.
−
*3. The text "P25 RES TIME" appears in the bottom line of the display, with +0 next to it.
+
# Press in the function knob. WHILE THE F IS FLASHING IN THE UPPER LEFT OF THE DISPLAY, press the volume knob ONCE.
−
*4. Rotate the scroll knob to adjust the setting. -7 is the recommended setting (may vary per system)
+
# The text "P25 RES TIME" appears in the bottom line of the display, with +0 next to it.
−
*5. Once set to the desired level, press the scroll knob.
+
# Rotate the scroll knob to adjust the setting. -7 is the recommended setting (may vary per system)
−
*6. Press the scroll knob again, and while the F is flashing, rotate the knob. P25 REF GAIN now appears, also with a +0 to the right of it.
+
# Once set to the desired level, press the scroll knob.
−
*7. Rotate the scroll knob to adjust the setting. +3 is the recommended setting (may vary per system)
+
# Press the scroll knob again, and while the F is flashing, rotate the knob. P25 REF GAIN now appears, also with a +0 to the right of it.
−
*8. Once set to the desired level, press the scroll knob.
+
# Rotate the scroll knob to adjust the setting. +3 is the recommended setting (may vary per system)
−
 
+
# Once set to the desired level, press the scroll knob.
−
Return to [[BCD396T]]<br>
 
−
[[Uniden_Scanners]]<br>
 
−
[[Main Page]]
 

Revision as of 17:12, 20 March 2007

Here is the procedure for tweaking the AGC digital/analog settings for the BCD396T and BCD996T.

NOTE! You MUST have digital AGC set to ON for the digital tweak to work. To adjust the analog AGC, Turn the digital AGC OFF, Make sure analog AGC is ON, then follow the same steps below, but be sure to remember to turn digital AGC back ON when finished. All settings are saved, even when you cycle power, and the option is no longer available until you access it again.

  1. Power on the 396T while pressing the HOLD/RESUME button.
    • Depending on model, you will hear two beeps OR the display will flash to indicate that the AGC tweak menu is enabled.
  2. Press in the function knob. WHILE THE F IS FLASHING IN THE UPPER LEFT OF THE DISPLAY, press the volume knob ONCE.
  3. The text "P25 RES TIME" appears in the bottom line of the display, with +0 next to it.
  4. Rotate the scroll knob to adjust the setting. -7 is the recommended setting (may vary per system)
  5. Once set to the desired level, press the scroll knob.
  6. Press the scroll knob again, and while the F is flashing, rotate the knob. P25 REF GAIN now appears, also with a +0 to the right of it.
  7. Rotate the scroll knob to adjust the setting. +3 is the recommended setting (may vary per system)
  8. Once set to the desired level, press the scroll knob.
Retrieved from "https://wiki.radioreference.com/index.php?title=Uniden_Digital_AGC_Tweak_Procedures&oldid=13152"