Actions

Difference between revisions of "Uniden Scanner Serial Numbers"

From The RadioReference Wiki

(Create Page)
 
Line 1: Line 1:
Since the introduction of the [BC250D] scanner [Uniden] has used a standardized 11-digit serial number protocol as follows:
+
Since the introduction of the [[BC250D]] scanner [[Uniden]] has used a standardized 11-digit serial number protocol as follows:
  
 
*123456789AB
 
*123456789AB
 
*383Z8812345
 
*383Z8812345
  
It is known that the [BC780XLT] did not use this protocol so it was likely instituted about 2001 with the follow up [BC785D] and [BC250D] which did.
+
It is known that the [[BC780XLT]] did not use this protocol so it was likely instituted about 2001 with the follow up [[BC785D]] and [[BC250D]] which did.
  
The first three characters (in our example "383" indicate the model number, in this example an [SDS100].
+
The first three characters (in our example "383" indicate the model number, in this example an [[SDS100]].
  
 
The fourth character seems to always be a "Z" for scanners, it is possible that this is indicative of the  scanner product line.  
 
The fourth character seems to always be a "Z" for scanners, it is possible that this is indicative of the  scanner product line.  
Line 12: Line 12:
 
The fifth character seems to be the year code, in our example is is an "8" so that would indicate a 2018 manufacture date. Depending on the scanner this could also indicate 2008.
 
The fifth character seems to be the year code, in our example is is an "8" so that would indicate a 2018 manufacture date. Depending on the scanner this could also indicate 2008.
  
The sixth character is unknown at this time. In our case it is an "8". On all the scanners in [N9JIG]'s fleet for example this character is either a 2, 4 or 8, but the sample size is less than 30 so it is entirely possible that there could be other numbers used.  
+
The sixth character is unknown at this time. In our case it is an "8". On all the scanners in [[N9JIG]]'s fleet for example this character is either a 2, 4 or 8, but the sample size is less than 30 so it is entirely possible that there could be other numbers used.  
  
 
Characters 7 thru 11 comprise the sequential serial number of the product. In our example the serial number would represent the 12, 345th radio of that model type manufactured, assuming that the numbers were applied in the order in which the radio was manufactured.
 
Characters 7 thru 11 comprise the sequential serial number of the product. In our example the serial number would represent the 12, 345th radio of that model type manufactured, assuming that the numbers were applied in the order in which the radio was manufactured.
Line 19: Line 19:
  
 
*'''Series  Model Nr  Year Introduced'''
 
*'''Series  Model Nr  Year Introduced'''
*315Z [BC250D]   2001
+
*315Z [[BC250D]]   2001
*316Z [BC785D]   2001
+
*316Z [[BC785D]]   2001
*319Z [BC296D]   2003
+
*319Z [[BC296D]]   2003
*320Z [BC796D]   2003
+
*320Z [[BC796D]]   2003
*326Z [BC246T]  
+
*326Z [[BC246T]]  
*328Z [BCD396T] 
+
*328Z [[BCD396T]
*330Z [BR330T]  
+
*330Z [[BR330T]]  
*335Z [BCD996T] 
+
*335Z [[BCD996T] 
*336Z [BCT15]  
+
*336Z [[BCT15]]  
*338Z [BC370CRS] 
+
*338Z [[BC370CRS]
*358Z [BC346XT] 
+
*358Z [[BC346XT]
*359Z [BCD396]  
+
*359Z [[BCD396]]  
*360Z [BCD996XT] 
+
*360Z [[BCD996XT]
*361Z [BCT15X]  
+
*361Z [[BCT15X]]  
*363Z [HP-1]  
+
*363Z [[HP-1]]  
*370Z [BC125AT] 
+
*370Z [[BC125AT]
*375Z [BCD536HP] 
+
*375Z [[BCD536HP]
*376Z [BCD436HP] 
+
*376Z [[BCD436HP]
*377Z [HP-2]  
+
*377Z [[HP-2]]  
*378Z [BCD996P2] 
+
*378Z [[BCD996P2]
*379Z [BCD325P2] 
+
*379Z [[BCD325P2]
*383Z [SDS100]   2018
+
*383Z [[SDS100]]   2018

Revision as of 11:55, 29 July 2018

Since the introduction of the BC250D scanner Uniden has used a standardized 11-digit serial number protocol as follows:

  • 123456789AB
  • 383Z8812345

It is known that the BC780XLT did not use this protocol so it was likely instituted about 2001 with the follow up BC785D and BC250D which did.

The first three characters (in our example "383" indicate the model number, in this example an SDS100.

The fourth character seems to always be a "Z" for scanners, it is possible that this is indicative of the scanner product line.

The fifth character seems to be the year code, in our example is is an "8" so that would indicate a 2018 manufacture date. Depending on the scanner this could also indicate 2008.

The sixth character is unknown at this time. In our case it is an "8". On all the scanners in N9JIG's fleet for example this character is either a 2, 4 or 8, but the sample size is less than 30 so it is entirely possible that there could be other numbers used.

Characters 7 thru 11 comprise the sequential serial number of the product. In our example the serial number would represent the 12, 345th radio of that model type manufactured, assuming that the numbers were applied in the order in which the radio was manufactured.

Missing number series could be used for other product lines like CB and 2-way radios or perhaps internally for projects that may not have made it to a product release.