Uniden Scanner Serial Numbers
From The RadioReference Wiki
Revision as of 21:03, 3 May 2020 by N9JIG (Clean up RS Model numbers)
Uniden has a 3-digit code used for each of its scanner models since at least 1999, starting with 300 for the BC120XLT. Starting with the BC785D about 2001 that 3-digit code was generally used as part of the product's serial number as well, followed by the letter Z, codes for the year and location of manufacture and the sequential number. Exceptions are noted in the list below.
Uniden also manufactured many scanner models for Radio Shack and they also used the same model code but they used Radio Shack's serial number protocol. These are listed here as well.
The first three characters (in our example "383" indicate the model number, in this example an SDS100.
The fourth character seems to always be a "Z" for scanners, it is possible that this is indicative of the scanner product line.
The fifth character is the year code, in our example is an "8" so that would indicate a 2018 manufacture date. Depending on the scanner model this could also indicate 2008.
The sixth character is the factory code. These are the known codes used:
- 2 Beta/Engineering
- 4 China
- 6 Philippines
- 8 Vietnam
Characters 7 thru 11 comprise the sequential serial number of the product. In our example the serial number would represent the 12,345th radio of that model type manufactured, assuming that the numbers were applied in the order in which the radio was manufactured.
Missing number series could be used for other product lines like CB and 2-way radios or perhaps internally for projects that may not have made it to a product release.
This is not to be confused with the Electronic Serial Number ("ESN") used on certain Uniden scanners for mode upgrades like DMR, NXDN and ProVoice. This number is similar to the physical serial number but is all numeric (no letters) and 14 characters. For example an SDS200 ESN would be 384260xxxxxxxx. A 3-character alphanumeric "SUM" code follows the ESN with a dash, eg: 384260xxxxxxxx-1A3. The SUM code is used as a check-digit to verify the ESN. HomePatrol units have a dash in the ESN between characters 5 and 6.
The ESN is found by pressing Menu>Settings>See Scanner Information>Firmware Version on most scanners, on HomePatrol units it is obtained by pressing Menu>Advanced Menu>Version Information.
|Series||Model Nr||Year Introduced|
|323Z||BC72XLT (China Made)||2004|
|327Z||Pro-83 (Private Label for Radio Shack)||2004|
|331Z||Pro-2051 (Private Label for Radio Shack)||2004|
|344Z||Pro-528 (Private Label for Radio Shack)||2006|
|345Z||Pro-433 (Private Label for Radio Shack)||2006|
|348Z||BC95XLTB (SN is 323Z, Product ID is 348)||2006|
|350Z||Pro-162 (Private Label for Radio Shack||2007|
|351Z||Pro-160 (Private Label for Radio Shack)||2007|
|352Z||Pro-137 (Private Label for Radio Shack)||2007|
|353Z||Pro-135 (Private Label for Radio Shack)||2008|
|354Z||Pro-136 (Private Label for Radio Shack)||2008|
|359Z||BCD396XT (SN is 328Z, Product ID is 359)||2009|
|365Z||BC72XLT (Vietnam Made)||2011|
The following domestic and international models were also built during the 2001 to current time frame and likely carry a serial number in this protocol. Please edit them into the list as information is found:
- UBC800XLT (Similar to the BCT15X)
- UBC3000XLT (Similar to the BC250D)