Difference between revisions of "Vertex Standard VX-160"
From The RadioReference Wiki
(Vertex Standard VX-160) |
m (updated categories) |
||
| (17 intermediate revisions by 7 users not shown) | |||
| Line 1: | Line 1: | ||
'''Vertex Standard VX-160''' | '''Vertex Standard VX-160''' | ||
| − | [http://www.vertexstandard.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=75&ProdID=1&DivisionID=64 Vertex Standard Product Page] | + | [http://www.vertexstandard.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=75&ProdID=1&DivisionID=64 Vertex Standard VX-160 Product Page] |
| − | The Vertex Standard VX-160 is similar to the VX-180 but without an LCD display and front panel programmable soft keys, allowing less programmable options. This radio is programmed with the Vertex CE44 software and CT-42A programming cable. Some generic cables may also work; buy generic at your own risk. It is recommended that you run the CE44 software on an older PC that can be dedicated to radio programming. The author uses a Pentium 75 MHz IBM PC running IBM PC DOS | + | [[Image:VX-160.jpg|frame|Model VX-160]] |
| + | |||
| + | The Vertex Standard VX-160 is similar to the VX-180 but without an LCD display and front panel programmable soft keys, allowing less programmable options. It is available in VHF high band (VX-160V) and UHF (VX-160U) models. This radio is programmed with the Vertex CE44 software and CT-42A programming cable. Some generic cables may also work; buy generic at your own risk. It is recommended that you run the CE44 software on an older PC that can be dedicated to radio programming. The author uses a Pentium 75 MHz IBM PC running IBM PC DOS 6.3 to program the VX-180. | ||
Programming of the VX-160U(D) with 70cm amateur frequencies should be possible, as it is with the VX-180U(D). | Programming of the VX-160U(D) with 70cm amateur frequencies should be possible, as it is with the VX-180U(D). | ||
| + | |||
| + | =Documentation= | ||
| + | *[http://www.vertexstandard.com/lmr/downloadFile.cfm?FileID=5444&FileCatID=135&FileName=VX-160_180+(USA)_OM_EN.pdf&FileContentType=application%2fpdf%27%20target=%27_blank VX-160/180 USA Owners Manual] | ||
| + | *[http://www.vertexstandard.com/lmr/downloadFile.cfm?FileID=6616&FileCatID=135&FileName=VX-160E_VX-180E_OM_ENG_EC037N201.pdf&FileContentType=application%2fpdf%27%20target=%27_blank VX-160/180 European Owners Manual] | ||
| + | |||
| + | |||
| + | ---- | ||
| + | Return to [[Vertex Standard Radios]] | ||
| + | |||
| + | [[Category:Vertex Professional Radios]] | ||
| + | [[Category:Handheld Professional Radios]] | ||
| + | [[Category:Radio Models]] | ||
Latest revision as of 00:30, 12 February 2016
Vertex Standard VX-160
Vertex Standard VX-160 Product Page
The Vertex Standard VX-160 is similar to the VX-180 but without an LCD display and front panel programmable soft keys, allowing less programmable options. It is available in VHF high band (VX-160V) and UHF (VX-160U) models. This radio is programmed with the Vertex CE44 software and CT-42A programming cable. Some generic cables may also work; buy generic at your own risk. It is recommended that you run the CE44 software on an older PC that can be dedicated to radio programming. The author uses a Pentium 75 MHz IBM PC running IBM PC DOS 6.3 to program the VX-180.
Programming of the VX-160U(D) with 70cm amateur frequencies should be possible, as it is with the VX-180U(D).
Documentation
Return to Vertex Standard Radios