Actions

Difference between revisions of "Vertex Standard VX-180"

From The RadioReference Wiki

m
m (updated categories)
 
(7 intermediate revisions by 5 users not shown)
Line 1: Line 1:
'''Vertex Standard VX-180'''
+
[[Image:VX-180.jpg|frame|Model VX-180]]
  
[http://www.vertexstandard.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=75&ProdID=2&DivisionID=64 Vertex Standard VX-180 Product Page]
+
=General Information=
  
'''General Information'''
+
The VX-180 is available in VHF high band (VX-180V) and UHF (VX-180U) models.  Programming is accomplished with Vertex CE44 software and CT-42A programming cable.  Generic versions of this cable available on eBay and elsewhere can also be used to program the radio, but buy generic at your own risk.  It is recommended that you run the CE44 software on an older bare-bones PC running DOS exclusively to eliminate hardware conflicts and processor speeds that the software cannot deal with.  The author uses a 75 MHz Pentium IBM PC running IBM PC-DOS 6.3 to program this radio.
  
The VX-180 is available in VHF high band (VX-180V) and UHF (VX-180U) models.  Programming is accomplished with Vertex CE44 software and CT-42A programming cable.  Generic versions of this cable available on eBay and elsewhere can also be used to program the radio, but buy generic at your own risk.  It is recommended that you run the CE44 software on an older bare-bones PC running DOS exclusively to eliminate hardware conflicts and bus speeds that the software cannot deal with.  The author uses a 75 MHz Pentium IBM PC running IBM PC-DOS 6.3 to program this radio.
+
==Amateur 70cm Band Programming (VX-180U - UHF Model)==
  
'''Amateur 70cm Band Programming (VX-180U - UHF Model)'''
+
While the advertised frequency range of the VX-180U(D) is 450-485 MHz, the author has found that the radio will accept programming of amateur frequencies in the 70cm band right out of the box, without any modifications.  The radio seems to perform well in this frequency range, although no measurements have been made with test equipment.
 +
 
 +
=Features=
 +
*16 CHANNEL CAPACITY
 +
*5 WATTS POWER OUTPUT (Selectable to 1 Watt)
 +
*8-CHARACTER ALPHANUMERIC DISPLAY
 +
*12.5/25 kHz BANDWIDTH PROGRAMMABLE BY CHANNEL
 +
*Dual 2-Tone decode
 +
*UHF D Range 450 - 485 MHz
 +
*VHF C Range 146 - 174 MHz
 +
 
 +
=Documentation=
 +
*[http://www.vertexstandard.com/lmr/downloadFile.cfm?FileID=5444&FileCatID=135&FileName=VX-160_180+(USA)_OM_EN.pdf&FileContentType=application%2fpdf%27%20target=%27_blank VX-160/180 USA Owners Manual]
 +
*[http://www.vertexstandard.com/lmr/downloadFile.cfm?FileID=6616&FileCatID=135&FileName=VX-160E_VX-180E_OM_ENG_EC037N201.pdf&FileContentType=application%2fpdf%27%20target=%27_blank VX-160/180 European Owners Manual]
 +
*[http://www.vertexstandard.com/lmr/downloadFile.cfm?FileID=714&FileCatID=144&FileName=VX-180.pdf&FileContentType=application%2fpdf%27%20target=%27_blank VX-180 Sales Brochure]
 +
 
 +
----
  
While the advertised frequency range of the VX-180U(D) is 450-485 MHz, the author has found that the radio will accept programming of amateur frequencies in the 70cm band right out of the box, without any modifications.  The radio seems to perform well in this frequency range, although no measurements have been made with test equipment.
+
Return to [[Vertex Standard Radios]]
 +
 
 +
[[Category:Vertex Professional Radios]]
 +
[[Category:Handheld Professional Radios]]
 +
[[Category:Radio Models]]

Latest revision as of 00:31, 12 February 2016

Model VX-180

General Information

The VX-180 is available in VHF high band (VX-180V) and UHF (VX-180U) models. Programming is accomplished with Vertex CE44 software and CT-42A programming cable. Generic versions of this cable available on eBay and elsewhere can also be used to program the radio, but buy generic at your own risk. It is recommended that you run the CE44 software on an older bare-bones PC running DOS exclusively to eliminate hardware conflicts and processor speeds that the software cannot deal with. The author uses a 75 MHz Pentium IBM PC running IBM PC-DOS 6.3 to program this radio.

Amateur 70cm Band Programming (VX-180U - UHF Model)

While the advertised frequency range of the VX-180U(D) is 450-485 MHz, the author has found that the radio will accept programming of amateur frequencies in the 70cm band right out of the box, without any modifications. The radio seems to perform well in this frequency range, although no measurements have been made with test equipment.

Features

  • 16 CHANNEL CAPACITY
  • 5 WATTS POWER OUTPUT (Selectable to 1 Watt)
  • 8-CHARACTER ALPHANUMERIC DISPLAY
  • 12.5/25 kHz BANDWIDTH PROGRAMMABLE BY CHANNEL
  • Dual 2-Tone decode
  • UHF D Range 450 - 485 MHz
  • VHF C Range 146 - 174 MHz

Documentation


Return to Vertex Standard Radios