Difference between revisions of "BC796D"
From The RadioReference Wiki
(remove scanning ark.link - gone) |
(→General Specifications: Add CTCSS auto identification) |
||
Line 10: | Line 10: | ||
* Continuous Band Coverage - 25MHz to 1.3GHz (Minus Cellular) | * Continuous Band Coverage - 25MHz to 1.3GHz (Minus Cellular) | ||
* Preprogramed Service Searches (12) | * Preprogramed Service Searches (12) | ||
− | * TrunkTracker IV - | + | * [[TrunkTracker IV]] with [[I-Call]] monitoring |
− | * CTCSS | + | * [[CTCSS]] and [[DCS]] [[Automatic_CTCSS_identification|automatic identification]] |
− | * | + | * [[SAME]] Weather Alert - Specific Area Message Encoding - During a NOAA Weather or Emergency Alert, a code for your specific location will alert you to severe conditions in your immediate area. |
* Alpha Tagging - Bank Channel and Search Range | * Alpha Tagging - Bank Channel and Search Range | ||
* Backlit Keypad - Offers you added visibility for dialing at night or in low light. | * Backlit Keypad - Offers you added visibility for dialing at night or in low light. |
Revision as of 01:08, 20 March 2007
The BC796D Digital Capable Scanner is APCO 25 Capable with 1000 channels, 10 banks, 10 priority channels and continuous band coverage.
Contents
General Specifications
- Rebanding supported? YES
- APCO 25 Digital Operation - Including 9600 Baud C4FM & CQPSK*
- PC Control/Programming (Software and serial port interface included)
- 1000 Channels, 10 Banks, 10 Priority Channels
- Continuous Band Coverage - 25MHz to 1.3GHz (Minus Cellular)
- Preprogramed Service Searches (12)
- TrunkTracker IV with I-Call monitoring
- CTCSS and DCS automatic identification
- SAME Weather Alert - Specific Area Message Encoding - During a NOAA Weather or Emergency Alert, a code for your specific location will alert you to severe conditions in your immediate area.
- Alpha Tagging - Bank Channel and Search Range
- Backlit Keypad - Offers you added visibility for dialing at night or in low light.
Modifications
Reviews and User Opinions
Related Pages
- Strong Signals BC796D Club
- Uniden User's Manual (PDF)
- NOTE: Go about 1/2 way down the page
Supporting Software
- ARC250
- ARC250PRO
- ARC-EasyStream
- BC250 Clone
- Control Freq v2
- IDTracker
- ProScan
- Scancat Gold for Windows
- Scancat Lite Plus
- Scan Pro software for the 250/785
- Scan Control
- sprog (Unix Software)
- Trunkstar Pro
- Trunkstar XLT
- UASD and Firmware updates 796
- Winscan DP
Yahoo Groups and Mailing Lists (software and receiver support)
- Uniden BC796D-BC296D Yahoo group
- UnidenBC796D Yahoo group
- Uniden_BC796D Yahoo group
- BC796D Yahoo group
- RadioReference Uniden forum
- ARC250/785 Yahoo group
- ProScan Support Forum
- Scancat Yahoo group
- Scan Control Yahoo group
- Strong Signals BC796D Forum
- Strong Signals Uniden Message board
To Erase Memory
- 1) Turn radio off
- 2) Press and hold three keys 2,9,manual and while holding those keys in, turn on radio.
- 3) Display reads "ALL Memory Clear Please Wait"
eBay Listings
Return to Uniden Scanners