Difference between revisions of "IC-PCR1000"
From The RadioReference Wiki
m (remove Strong Signal link - site is gone) |
|||
Line 27: | Line 27: | ||
* [http://www.eham.net/reviews/detail/429 EHam Review of the PCR1000 page 1] | * [http://www.eham.net/reviews/detail/429 EHam Review of the PCR1000 page 1] | ||
* [http://www.eham.net/reviews/detail/3391 EHam Review of the PCR1000 page 2] | * [http://www.eham.net/reviews/detail/3391 EHam Review of the PCR1000 page 2] | ||
− | |||
==Related Pages== | ==Related Pages== | ||
Line 48: | Line 47: | ||
* [http://groups.yahoo.com/group/Probe-Software/ Probe Yahoo group] | * [http://groups.yahoo.com/group/Probe-Software/ Probe Yahoo group] | ||
* [http://mailman.qth.net/mailman/listinfo/pcr-1000 PCR1000 group at QTH.Net] | * [http://mailman.qth.net/mailman/listinfo/pcr-1000 PCR1000 group at QTH.Net] | ||
− | |||
* [http://www.radioreference.com/forums/forumdisplay.php?f=84 Icom Forum at RadioReference] | * [http://www.radioreference.com/forums/forumdisplay.php?f=84 Icom Forum at RadioReference] | ||
Revision as of 15:16, 5 July 2012
This page lists links, related pages and software support for the Icom PCR1000 receiver. The technical specifications can be viewed here (copied from Icom website via Universal Radio).
Contents
General Specifications
- 10kHz-824MHz, 849-869, 894-1300MHz range (USA)
- WFM, FM, AM, SSB, CW
- 1000 channels per file
- 1, 5, 6.25, 9, 10, 12.5, 15, 20, 25, 30, 50, 100, 500kHz; 1MHz steps (?)
- Bandscope
- Noise blanker
- Signal meter
- Digital AFC
- Autostore
- Automatic gain control (AGC)
- Narrow/wide filters
- Icom PCR1000 Specs
Modifications
Reviews and User Opinions
- Medium Wave Circle PCR1000 review
- EHam Review of the PCR1000 page 1
- EHam Review of the PCR1000 page 2
Related Pages
- DXing.com Modern Shortwave Receiver Survey
- Icom PCR1000 Resource Page
- IcomReceivers.Com
- Icom Manuals
- Using the PCR-1000 with Trunker
Supporting Software
- Probe1K
- PCR Mini
- PCR-1000 Signal Capture and Analysis
- See our Receiver Software Applications and Amateur Radio Transceiver Control articles for additional support
Yahoo Groups and Mailing Lists (software and receiver support)
- CTR-Remote Yahoo group
- PCR1000 Yahoo group
- PCR1000 Yahoo group 2
- Probe Yahoo group
- PCR1000 group at QTH.Net
- Icom Forum at RadioReference
Modifications
Discriminator
10.7 MHZ IF Output
The buffered 10.7 MHz IF Output is available at the emitter of transistor Q85. Q85 is located close to the edge of the large board, near J1. If you place the radio with the antenna connection to the left, Q85 is the first transistor to the right of the smaller IF filter at the top lefthand corner of the RF board. This is directly above the metal can for one of the LO's. The emitter is the upper left terminal (if the radio is oriented as described above). There will be a DC level at this point, so will want a coupling capacitor. (Thanks to gr8amp in the forums)
Other
eBay Listings
Back to Icom Radios