Difference between revisions of "Broadcastify/RTLSDR-Airband"
From The RadioReference Wiki
Line 6: | Line 6: | ||
=== Sample Config Files === | === Sample Config Files === | ||
− | # Sample file of "rtl_airband.conf" custom for BroadCastify.com | + | # Sample file of "rtl_airband.conf" custom for BroadCastify.com server streaming |
# index = 0 => First dongle | # index = 0 => First dongle | ||
# index = 1 => Second dongle | # index = 1 => Second dongle |
Revision as of 14:20, 8 January 2020
RTLSDR-Airband receives analog radio voice channels and produces audio streams which can be routed to various outputs.
Download: https://github.com/szpajder/RTLSDR-Airband
Broadcastify Fully Supports RTLSDR-Airband
Sample Config Files
- Sample file of "rtl_airband.conf" custom for BroadCastify.com server streaming
- index = 0 => First dongle
- index = 1 => Second dongle
devices: ({
type = "rtlsdr"; index = 0; gain = 28; correction = 0; mode = "scan"; channels: ( { #squelch = 35; # Uncomment to set squelch manually freqs = ( 118200000, 119450000, 121900000, 124200000 ); # MODIFY_YOUR_AIRPORT_AIRBAND_FREQUENCY labels = ( "Tower", "S-Approach", "Ground", "N-Approach" ); # MODIFY_YOUR_AIRPORT_AIRBAND_FREQUENCY_NAME_LABELS outputs: (
# For local IceCast
{ type = "icecast"; server = "127.0.0.1"; port = 8000; mountpoint = "LOCAL"; name = "Airport_ICAO"; genre = "ATC"; username = "source"; password = "hackme"; send_scan_freq_tags = true;
description = "LOCAL IceCast Server";
},
# For remote BroadCastify
{ type = "icecast"; server = "audioX.radioreference.com"; # FROM_YOUR_RR_FEED_PROVIDER_PAGE port = 80; # PORT_OF_RR_FEED_PROVIDER_ICECAST_SERVER_USUALLY_8000 mountpoint = "XXXXXXXX"; # MOUNT_POINT_FROM_YOUR_RR_FEED_PROVIDER_PAGE name = "XXXXXXXX"; # FEED_NAME_THAT_RR_GAVE_YOU_WHEN_YOU_APPLIED
genre = "ATC";
username = "source"; password = "XXXXXXXX"; # PASSWD_FROM_YOUR_RR_FEED_PROVIDER_PAGE send_scan_freq_tags = true;
description = "XXXXXXXX"; # DESCRIPTION_ASSIGNED_FROM_YOUR_RR_FEED_APPLICATION
}
# If you need more outputs, put here # Make sure you remove the comma at the end of the profile segment template e.g. "}," to "}" else you get and error !
); } ); }
);