Difference between revisions of "Pager Screen"
From The RadioReference Wiki
(Created page with "Applies to: SC230 ---------------------------------------- To Access: *Press Menu. Scroll to 'Srch/CloCall Opt' and press E/Yes. (SC230 only): This setting determines whe...") |
(No difference)
|
Revision as of 01:01, 30 April 2021
Applies to: SC230
To Access:
- Press Menu. Scroll to 'Srch/CloCall Opt' and press E/Yes.
(SC230 only): This setting determines whether the scanner automatically ignores transmissions found during Custom Search, Service Search, or Close Call Search that are on common paging systems.
- Scroll to 'Pager Screen' and press E/Yes.
- Scroll to On and press E/Yes to skip known paging system frequencies.
- Press Scan to exit.
- Note: Broadcast screen is not effective during some service searches.
Credit Easier to Read manual