Difference between revisions of "Sandbox"
From The RadioReference Wiki
Line 6: | Line 6: | ||
==General Specifications== | ==General Specifications== | ||
− | + | * 10kHz-1300MHz range | |
− | + | * 1000 channels per file (50 channels x 20 banks) | |
+ | * 1, 5, 6.25, 9, 10, 12.5, 15, 20, 25, 30, 50, 100, 500kHz; 1MHz steps | ||
* [http://www.universal-radio.com/catalog/widerxvr/3100spec.html Icom PCR-100 Specs] | * [http://www.universal-radio.com/catalog/widerxvr/3100spec.html Icom PCR-100 Specs] | ||
Revision as of 02:48, 29 November 2006
This page lists links, related pages and software support for the Icom PCR-100 receiver.
Contents
General Specifications
- 10kHz-1300MHz range
- 1000 channels per file (50 channels x 20 banks)
- 1, 5, 6.25, 9, 10, 12.5, 15, 20, 25, 30, 50, 100, 500kHz; 1MHz steps
- Icom PCR-100 Specs
Reviews and User Opinions
Related Pages
Supporting Software
- Bonito Radiocom 5
- IP1KC
- IP1k2
- PCR Remote
- PCScan
- RadioControl
- Radiomax
- Scancat
- Shortwave Log
- Spectrum Commander
- Spectrum Dominator
- Spectrum Manager
- TalkPCR
- TrunkPCR
Yahoo Groups and Mailing Lists (software and receiver support)
- Scancat Yahoo group
- Shortwave Log Yahoo group
- Spectrum Commander Yahoo group
- TalkPCR Yahoo group
- TrunkPCR Yahoo group
- Icom Forum at Strong Signals
- Icom Forum at RadioReference
Modifications
Discriminator
10.7 MHZ IF Output
The buffered 10.7 MHz IF Output is available at the emmiter of transistor of Q85. Q85 is located close to the edge of the large board, near J1. If you place the radio with the antenna connection to the left, Q85 is the first transisor to the right of the smaller IF filter at the top lefhand corner of the RF board. This is directly above the metal can for one of the LO's. The emmitter is the upper left terminal (if the radio is oriented as described above). There will be a DC level at this point, so will want a coupling capacitor. (Thanks to gr8amp in the forums)
Other
eBay Listings
Back to Icom Radios