Broadcastify-Calls-Trunk-Recorder
From The RadioReference Wiki
Contents
Download and Build Trunk Recorder
You need to download and build the latest version of Trunk Recorder
Build instructions are here:
Make sure you have ffmpeg compiled and built to support AAC audio encoding. See at the bottom of the page for details
Apply for API Key and System ID
You will need an API Key and System ID assigned by the Broadcastify administrator before you can get started.
To get a System ID and API Key issued, send an email to support@radioreference.com with the following info:
- Your RadioReference/Broadcastify Username
- Trunked or Conventional System(s) you wish to send to us
- Trunked Site Name (in the RRDB) or Frequencies List to send to us
- County where your ingest system resides
Configure Trunk Recorder
There are 3 configuration options
broadcastifyApiKey : specified for each system entry in your trunk-recorder config this is the API Key issued to you by the administrator broadcastifySystemId : specified for each system entry in your trunk-recorder config this is the unique system identifier issued to you by the administrator broadcastifyCallsServer : specified SYSTEMWIDE in your trunk-recorder config should always be set to: "https://api.broadcastify.com/call-upload"
Example Trunk Recorder configuration
- API Key Example: "9c3e3b1d-324f-11aa-bd8b-0ec68ab9ccec"
- System ID Example: "91"
{ "sources": [{ "center": 853000000.0, "rate": 2048000, "ppm": 69.0, "gain": 35.0, "digitalLevels": 3, "digitalRecorders": 4, "driver": "osmosdr", "device": "rtl=02,buflen=65536", "modulation": "fsk4" }], "systems": [{ "control_channels": [851325000, 851825000], "type": "p25", "shortName": "mySystemName", "broadcastifyApiKey": "9c3e3b1d-324f-11aa-bd8b-0ec68ab9ccec", "broadcastifySystemId": "91", "audioArchive": false }], "broadcastifyCallsServer": "https://api.broadcastify.com/call-upload", "controlWarnRate": 5, "callTimeout": 0.75 }
Compile and Install FFMpeg with AAC-HE Support
To install on Ubuntu 18.04 add bionic universe and multiverse package repos then follow the instructions for Ubuntu 16.04
sudo add-apt-repository "deb http://archive.ubuntu.com/ubuntu bionic universe" sudo add-apt-repository "deb http://archive.ubuntu.com/ubuntu bionic multiverse" sudo apt-get update sudo apt-get upgrade
Install for Ubuntu 16.04. This is a minimal install, check out the FFMPEG docs if you want more libraries enabled.
sudo apt-get update sudo apt-get -y install autoconf automake build-essential libass-dev libfreetype6-dev \ libtool pkg-config texinfo zlib1g-dev yasm libfdk-aac-dev wget http://ffmpeg.org/releases/ffmpeg-snapshot.tar.bz2 tar xjvf ffmpeg-snapshot.tar.bz2 cd ffmpeg ./configure \ --pkg-config-flags="--static" \ --bindir="$HOME/bin" \ --enable-gpl \ --enable-libass \ --enable-libfdk-aac \ --enable-nonfree make sudo make install