Software Support for Uniden Rebanding
From The RadioReference Wiki
Please use this article to document how to enter the Rebanding changes outlined below in the various software packages that support Uniden scanners.
Band Plan | Base Freq (lower) | Base Freq (upper) | Offset | Polarity | Spacing |
---|---|---|---|---|---|
1 | 851.025 | 854.000 | 440 | + | 25 khz |
2 | 851.0125 | 868.9875 | 0 | + | 25 khz |
As of this writing, the following software packages are known to support rebanding. Note the scanners currently supported; all packages are expected to be upgraded for other scanners when Uniden releases the firmware.
- FreeScan
- FreeScan User Guide
- Currently Supported: BCD396, 996, 246, and BCT15
- Scan Control (version 7.0)
- Currently Supported: BCD396 and 996
- ProScan (version 1.83)
- Currently Supported: BCD396, 996, BCT15, BC296D, BC796D
- ARC396 (version 3.0 - available from Scanner Master)
- ARC996 (same)
- ARC246 (same)
- ARC15 (same)
- BCTool not yet supported, but is expected to be in the near future
FreeScan
To access this screen, change the site type to Mot Custom/Reband
Return to the Uniden DMA FAQ