Search with Scan
From The RadioReference Wiki
Applies to: BR330T
- Press and hold Func then press Scan/Srch. At 'Quick Search?' press (.)no.
- Or, Press Menu. Scroll to 'Search For...' and press E/yes.
- Scroll to 'Edit Service' and press E/yes.
- Scroll to the service search you want to edit and press E/yes.
- Scroll to Set Delay Time and press E/yes.
- Scroll to 1, 2, 3, 4, 5, seconds or Off to set delay and press E/yes.
- Scroll to Set Attenuator and press E/yes.
- Scroll to On or Off and press E/yes.
- Scroll to Search with Scan and press E/yes.
- Scroll to Set Lockout and press E/yes. (Used for 'Search with Scan' only).
- Scroll to 'Unlocked', 'Temporary L/O', or 'Lockout' and press E/yes to save and exit.
- Scroll to Set Hold Time (the amount of time the search will search in Scan Mode) and press E/yes.
- Enter the hold time (0-255 seconds) you desire and press E/yes to save and exit.
- Press Menu and scroll to another service search and repeat the previous steps or press L/O to exit.
Credit Easier to Read manual