Difference between revisions of "BC785D"
From The RadioReference Wiki
(Shortcut one page for programming the BC250/785D scanners) |
|||
Line 33: | Line 33: | ||
16. press scan after last E | 16. press scan after last E | ||
− | + | Program ID’s as follows: | |
1. press MENU | 1. press MENU | ||
2. press 2 | 2. press 2 |
Revision as of 00:33, 13 February 2005
Programming the 785D for Mot or ED Motorola Type I or IIi Systems Set the Fleetmap as follows: 1. press MENU 2. press 2 3. press 2 4. press VFO or E 5. press 1 6. press 1 7. press 2 8. press VFO or E if using Custom settings (you can rotate the VFO for a preset) 9. Rotate VFO to Size Code number for Block 0, Press VFO or E repeat this step for Block 1 through 7. When each block is set, press Scan. Motorola Type II or EDACS Systems Program the frequencies as follows: assuming bank 1 1. press MENU 2. press 2 3. press 2 4. press VFO or E 5. press 1 6. press 1 7. press 1=MO II 800, 3=MO 900. 4=MO UHF, 5=MO VHF, 6=ED Wide, 7=ED Narrow, 8=ED SCAT 8. press 2 9. press VFO or E 10. press 1 11. using numbered and decimal keys enter frequency 12. press VFO or E 13. press MENU three times 14. rotate VFO to next channel (C 002 L/O should appear at top) 15. repeat steps 9 through 14 until all are entered (the new top should be C 003...) 16. press scan after last E Program ID’s as follows: 1. press MENU 2. press 2 3. press 2 4. press VFO or E 5. press 3 6. press VFO or E 7. press 1 8. using numbered keys enter the first ID, I.E. (MO 57932) or (ED 00-041) 9. press VFO or E 10. press 2 11. rotate the VFO (clockwise) until the Capital letter L appears 12. press VFO 13. rotate the VFO to the next letter (A, in this case rotate ccw) 14. press VFO 15. rotate the VFO to the next letter (W, in this case rotate cw) 16. press E 17. press MENU 18. rotate VFO to next ID (M1-2 should be at the top) 19. repeat steps 6 through 18 for all other ID’s and text tag’s replace letters in steps 11, 13 and 15 as needed