|
|
Line 1: |
Line 1: |
− | <pre>Programming the 785D for Mot or ED
| |
| | | |
− | Motorola Type I or IIi Systems
| |
− | Set the Fleetmap as follows:
| |
− | 1. press MENU
| |
− | 2. press 2
| |
− | 3. press 2
| |
− | 4. press VFO or E
| |
− | 5. press 1
| |
− | 6. press 1
| |
− | 7. press 2
| |
− | 8. press VFO or E if using Custom settings (you can rotate the VFO for a preset)
| |
− | 9. Rotate VFO to Size Code number for Block 0, Press VFO or E
| |
− | repeat this step for Block 1 through 7. When each block is set, press Scan.
| |
− |
| |
− | Motorola Type II or EDACS Systems
| |
− | Program the frequencies as follows: assuming bank 1
| |
− | 1. press MENU
| |
− | 2. press 2
| |
− | 3. press 2
| |
− | 4. press VFO or E
| |
− | 5. press 1
| |
− | 6. press 1
| |
− | *7. press 1=Mot II 800, 3=900. 4=UHF *, 5=VHF *, 6=ED Wide, 7=Narrow, 8=SCAT
| |
− | 8. press 2
| |
− | 9. press VFO or E
| |
− | 10. press 1
| |
− | 11. using numbered and decimal keys enter frequency
| |
− | 12. press VFO or E
| |
− | 13. press MENU three times
| |
− | 14. rotate VFO to next channel (C 002 L/O should appear at top)
| |
− | 15. repeat steps 9 through 14 until all are entered (the new top should be C 003...)
| |
− | 16. press scan after last E
| |
− | *After pressing 4 or 5 for VHF/UHF in step 7 above, skip steps 8 through 10 and use steps
| |
− | (a through l) below to enter data for VHF or UHF
| |
− | a. press VFO or E
| |
− | b. enter base frequency
| |
− | c. press VFO or E
| |
− | d. enter space setting
| |
− | e. press VFO or E
| |
− | f. enter offset channel
| |
− | g. press VFO or E
| |
− | h. repeat steps (a through g) for additional settings for UHF or VHF
| |
− | i. press MENU three times
| |
− | j. press 2
| |
− | k. press VFO or E
| |
− | l. return to step 11 above for entering frequencies.
| |
− |
| |
− | Program ID’s as follows:
| |
− | 1. press MENU
| |
− | 2. press 2
| |
− | 3. press 2
| |
− | 4. press VFO or E
| |
− | 5. press 3
| |
− | 6. press VFO or E
| |
− | 7. press 1
| |
− | 8. using numbered keys enter the first ID, I.E. (MO 57932) or (ED 00-041)
| |
− | 9. press VFO or E
| |
− | 10. press 2
| |
− | 11. rotate the VFO (clockwise) until the Capital letter L appears
| |
− | 12. press VFO
| |
− | 13. rotate the VFO to the next letter (A, in this case rotate ccw)
| |
− | 14. press VFO
| |
− | 15. rotate the VFO to the next letter (W, in this case rotate cw)
| |
− | 16. press E
| |
− | 17. press MENU
| |
− | 18. rotate VFO to next ID (M1-2 should be at the top)
| |
− | 19. repeat steps 6 through 18 for all other ID’s and text tag’s replace
| |
− | letters in steps 11, 13 and 15 as needed
| |
− | </pre>
| |