Difference between revisions of "Broadcastify-Calls-Trunk-Recorder"
From The RadioReference Wiki
| Line 24: | Line 24: | ||
=== Apply for API Key and System ID === | === Apply for API Key and System ID === | ||
| − | You will need an '''API Key''' and '''System ID''' assigned by the | + | You will need an '''API Key''' and '''System ID''' assigned by the administrator before you can get started. |
To get a System ID and API Key issued, send an email to '''support@radioreference.com''' with the following info: | To get a System ID and API Key issued, send an email to '''support@radioreference.com''' with the following info: | ||
# Your RadioReference/Broadcastify Username | # Your RadioReference/Broadcastify Username | ||
| − | # Trunked | + | # Trunked System(s) you wish to send to us |
| − | # Trunked Site Name (in the RRDB) | + | # Trunked Site Name and SiteID (in the RRDB) |
| + | # Call Upload Application Name (Trunk Recorder, VoxCall, etc) | ||
# County where your ingest system resides | # County where your ingest system resides | ||
Revision as of 13:11, 1 May 2020
Contents
Install the Required Prerequisites
Ubuntu
- libssl-dev
- libcurl4-openssl-dev
- fdkaac
- sox
sudo apt-get install libssl-dev libcurl4-openssl-dev fdkaac sox
Mac OS X
brew install fdk-aac-encoder sox
Download and Build Trunk Recorder
You need to download and build the latest version of Trunk Recorder
Build instructions are here:
Make sure you have fdkaac and sox installed as listed above in the prereqs!
Apply for API Key and System ID
You will need an API Key and System ID assigned by the administrator before you can get started.
To get a System ID and API Key issued, send an email to support@radioreference.com with the following info:
- Your RadioReference/Broadcastify Username
- Trunked System(s) you wish to send to us
- Trunked Site Name and SiteID (in the RRDB)
- Call Upload Application Name (Trunk Recorder, VoxCall, etc)
- County where your ingest system resides
Configure Trunk Recorder
There are 3 configuration options
broadcastifyApiKey : specified for each system entry in your trunk-recorder config
this is the API Key issued to you by the administrator
broadcastifySystemId : specified for each system entry in your trunk-recorder config
this is the unique system identifier issued to you by the administrator
broadcastifyCallsServer : specified SYSTEMWIDE in your trunk-recorder config
should always be set to: "https://api.broadcastify.com/call-upload"
Example Trunk Recorder configuration
- API Key Example: "9c3e3b1d-324f-11aa-bd8b-0ec68ab9ccec"
- System ID Example: "91"
{
"sources": [{
"center": 853000000.0,
"rate": 2048000,
"ppm": 69.0,
"gain": 35.0,
"digitalLevels": 3,
"digitalRecorders": 4,
"driver": "osmosdr",
"device": "rtl=02,buflen=65536",
"modulation": "fsk4"
}],
"systems": [{
"control_channels": [851325000, 851825000],
"type": "p25",
"shortName": "mySystemName",
"broadcastifyApiKey": "9c3e3b1d-324f-11aa-bd8b-0ec68ab9ccec",
"broadcastifySystemId": "91",
"audioArchive": false
}],
"broadcastifyCallsServer": "https://api.broadcastify.com/call-upload",
"controlWarnRate": 5,
"callTimeout": 0.75
}