Actions

Difference between revisions of "Broadcastify/RTLSDR-Airband"

From The RadioReference Wiki

Line 20: Line 20:
  
  
Else you can set "disable = true;" if you do not need that section profile enabled.
+
Else you can set "disable = true;" if you do not need that section profile enabled. Otherwise set "disabled = false;" if you need that section profile to be enabled for active usage.
  
  

Revision as of 05:30, 19 January 2020

RTLSDR-Airband receives analog radio voice channels and produces audio streams which can be routed to various outputs.


Download: https://github.com/szpajder/RTLSDR-Airband


Broadcastify Fully Supports RTLSDR-Airband.


RTLSDR-Airband - User's Manual: https://github.com/szpajder/RTLSDR-Airband/wiki


RTLSDR-Airband support multiple frequency channel scanning features.


Here is a custom rtl-airband.conf config file for Broadcastify server and local Icecast server if you have it setup in your Raspberry Pi unit.


Else you can set "disable = true;" if you do not need that section profile enabled. Otherwise set "disabled = false;" if you need that section profile to be enabled for active usage.


=== Sample Config Files ===

# Sample file of "rtl-airband.conf" output to BroadCastify.com icecast streaming server
# RTLSDR-Airband - User's Manual: https://github.com/szpajder/RTLSDR-Airband/wiki

# index = 0 => First dongle 
# index = 1 => Second dongle

devices: ({
  type = "rtlsdr";
  index = 0;
  gain = 28;
  correction = 0;
  mode = "scan";
  channels:
  (
    {
# squelch = 30; # Uncomment to set squelch manually
      freqs = ( 118200000, 119450000, 121900000, 124200000 );      # MODIFY_YOUR_AIRPORT_AIRBAND_FREQUENCY
      labels = ( "Tower", "S-Approach", "Ground", "N-Approach" );      # MODIFY_YOUR_AIRPORT_AIRBAND_FREQUENCY_NAME_LABELS
      outputs: (

	  # For local IceCast server
        {
          disable = true;      # IF_NO_LOCAL_ICECAST_SERVER_IS_AVAILABLE_SET_IT_TO_TRUE
          type = "icecast";
          server = "127.0.0.1";
          port = 8000;
          mountpoint = "LOCAL";
          name = "Airport_ICAO";
          genre = "ATC";
          username = "source";
          password = "hackme";
          send_scan_freq_tags = true;
	  description = "LOCAL IceCast Server";
        },
	
	  # For remote BroadCastify server
        {
          disable = false;      # THIS_PROFILE_TEMPLATE_ACTIVE_IN_USED
          type = "icecast";
          server = "audioXXXXXXXX.radioreference.com";     # FROM_YOUR_RR_FEED_PROVIDER_PAGE
          port = 80;      # PORT_OF_RR_FEED_PROVIDER_ICECAST_SERVER_USUALLY_8000
          mountpoint = "XXXXXXXX";      # MOUNT_POINT_FROM_YOUR_RR_FEED_PROVIDER_PAGE
          name = "XXXXXXXX";      # FEED_NAME_THAT_RR_GAVE_YOU_WHEN_YOU_APPLIED
	  genre = "ATC";
          username = "source";
          password = "XXXXXXXX";      # PASSWD_FROM_YOUR_RR_FEED_PROVIDER_PAGE
          send_scan_freq_tags = true;
	  description = "XXXXXXXX";      # DESCRIPTION_ASSIGNED_FROM_YOUR_RR_FEED_APPLICATION
        }
		
	# If you need more outputs, put under here ...


	# NOTICE: Make sure you remove the comma at the end of the profile segment template e.g. "}," to "}" else you get an error !

      );
    }
  );
 }
);


Multiple source streaming sample file config @ http://rodyeo.dyndns.org/download/rb24-vhf-share.zip by http://rodyeo.dyndns.org/