Actions

Difference between revisions of "DIY Antenna Mounting Bracket"

From The RadioReference Wiki

(New page: Details on how to make a simple add on bracket to add more antennas coming soon. Take care Tonsoffun)
 
m (updated categories)
 
(5 intermediate revisions by 2 users not shown)
Line 1: Line 1:
Details on how to make a simple add on bracket to add more antennas coming soon.
+
This is a very easy project to add more antennas on masts etc.
 +
Get yourself some 1/4" thick aluminum about 8"X8" from your local metal supplier or similar hardware stores, those screws are not needed!.
 +
 
 +
http://i21.photobucket.com/albums/b287/tonsoffun26/Aluminum.jpg
 +
 
 +
 
 +
You will also need four 2 1/4" muffler clamps.
 +
 
 +
http://i21.photobucket.com/albums/b287/tonsoffun26/Mufflerclamp.jpg
 +
 
 +
You can buy smaller if you prefer but I would rather go a little bigger on the clamps so you can fit up to a 2" metal or aluminum mast if you chose.
 +
 
 +
More info to come
 +
 
 +
 
 
Take care
 
Take care
 
Tonsoffun
 
Tonsoffun
 +
 +
 +
 +
[[Category:HF Antennas]]
 +
[[Category:MW Antennas]]
 +
[[Category:Amateur Radio Antennas]]
 +
[[Category:Receive-Only Antennas]]
 +
[[Category:Satellite Antennas]]
 +
[[Category:Scanner Antennas]]
 +
[[Category:Transceiver Antennas]]

Latest revision as of 12:32, 31 March 2016

This is a very easy project to add more antennas on masts etc. Get yourself some 1/4" thick aluminum about 8"X8" from your local metal supplier or similar hardware stores, those screws are not needed!.

Aluminum.jpg


You will also need four 2 1/4" muffler clamps.

Mufflerclamp.jpg

You can buy smaller if you prefer but I would rather go a little bigger on the clamps so you can fit up to a 2" metal or aluminum mast if you chose.

More info to come


Take care Tonsoffun