Difference between revisions of "DIY Antenna Mounting Bracket"
From The RadioReference Wiki
m (Added some info) |
|||
Line 1: | Line 1: | ||
+ | This is a very easy project to add more antennas on masts etc. | ||
Get yourself some 1/4" thick aluminum about 8"X8" from your local metal supplier or similar hardware stores, those screws are not needed!. | Get yourself some 1/4" thick aluminum about 8"X8" from your local metal supplier or similar hardware stores, those screws are not needed!. | ||
Line 9: | Line 10: | ||
You can buy smaller if you prefer but I would rather go a little bigger on the clamps so you can fit up to a 2" metal or aluminum mast if you chose. | You can buy smaller if you prefer but I would rather go a little bigger on the clamps so you can fit up to a 2" metal or aluminum mast if you chose. | ||
+ | |||
+ | More info to come | ||
Revision as of 09:29, 23 October 2008
This is a very easy project to add more antennas on masts etc. Get yourself some 1/4" thick aluminum about 8"X8" from your local metal supplier or similar hardware stores, those screws are not needed!.
You will also need four 2 1/4" muffler clamps.
You can buy smaller if you prefer but I would rather go a little bigger on the clamps so you can fit up to a 2" metal or aluminum mast if you chose.
More info to come
Take care
Tonsoffun