Difference between revisions of "Kenwood TK-270/370"
From The RadioReference Wiki
m (updated categories) |
|||
| Line 26: | Line 26: | ||
[http://www.repeater-builder.com/kenwood/field-programming-tk-x70.html here] | [http://www.repeater-builder.com/kenwood/field-programming-tk-x70.html here] | ||
| − | [[Category:Professional Radios]] | + | [[Category:Kenwood Professional Radios]] |
Revision as of 01:57, 20 January 2016
TK-270 = VHF
TK-370 = UHF
There are 2 different versions of this radio. The older one is called simply the TK-270/TK-370. The newer one is the TK-270G/TK-370G.
TK-270/TK-370 (Older version)
This radio is no longer produced by Kenwood.
TK-270G/TK-370G (Newer version)
- 128 channels
- CTCSS, DCS, DTMF, and 2-tone signalling.
- Keypad-programmable
- 5 watts
- Kenwood product page
- TK270G/TK370G Service Manual (PDF)
Programming
These radios can be programmed via the keypad. However, this option must be enabled through the software, and must have a component removed from the circuit board. If you have a radio that will not go into self-programming mode when you use the proper key combination (light button+dial button while turning the radio on), your radio has not been enabled for this option. The programming instructions can be found here