Difference between revisions of "Kenwood TK-270/370"
From The RadioReference Wiki
m (updated categories) |
|||
(4 intermediate revisions by 3 users not shown) | |||
Line 19: | Line 19: | ||
* Keypad-programmable | * Keypad-programmable | ||
* 5 watts | * 5 watts | ||
− | + | * [http://www.kenwood.net/indexKenwood.cfm?do=ProductDetails&ProdID=33&Group=1 Kenwood product page] | |
− | [http://www.kenwood.net/indexKenwood.cfm?do=ProductDetails&ProdID=33&Group=1 Kenwood product page] | + | * [[Media:TK-270G-370G Service Manual.pdf|TK270G/TK370G Service Manual (PDF)]] |
== Programming == | == Programming == | ||
− | These radios ''can'' be programmed via the keypad. However, this option must be enabled through the software, and must have a component removed from the circuit board. If you have a radio that will not go into self-programming mode when you use the proper key combination (light button+dial button while turning the radio on), your radio has not been enabled for this option. | + | These radios ''can'' be programmed via the keypad. However, this option must be enabled through the software, and must have a component removed from the circuit board. If you have a radio that will not go into self-programming mode when you use the proper key combination (light button+dial button while turning the radio on), your radio has not been enabled for this option. The programming instructions can be found |
+ | [http://www.repeater-builder.com/kenwood/field-programming-tk-x70.html here] | ||
− | [ | + | [[Category:Kenwood Professional Radios]] |
+ | [[Category:Handheld Professional Radios]] | ||
+ | [[Category:Radio Models]] |
Latest revision as of 00:12, 12 February 2016
TK-270 = VHF
TK-370 = UHF
There are 2 different versions of this radio. The older one is called simply the TK-270/TK-370. The newer one is the TK-270G/TK-370G.
TK-270/TK-370 (Older version)
This radio is no longer produced by Kenwood.
TK-270G/TK-370G (Newer version)
- 128 channels
- CTCSS, DCS, DTMF, and 2-tone signalling.
- Keypad-programmable
- 5 watts
- Kenwood product page
- TK270G/TK370G Service Manual (PDF)
Programming
These radios can be programmed via the keypad. However, this option must be enabled through the software, and must have a component removed from the circuit board. If you have a radio that will not go into self-programming mode when you use the proper key combination (light button+dial button while turning the radio on), your radio has not been enabled for this option. The programming instructions can be found here