Pro-433
From The RadioReference Wiki
The Pro-433 was manufactured by Uniden for Radio Shack. The Pro-433 is the base/mobile version of the Pro-528 and uses the same radio programming software and cables.
- Rebanding supported? Yes
- Multi-mode trunking (VHF,UHF,800,900,Motorola I/II/IIi, EDACS, LTR)
- Military Air
- Signal Stalker I (with 10 autostore channels)
- Triple-Conversion Circuitry
- 1,000 Channels with 100 channel-storage banks
- Ten Scan Lists
- Weather Search
- Weather Alert Indicator
- SAME-FIP Digital Weather Alert
- Two Second Scan Delay
- ID Delay
- EDACS Partial Talkgroups
- Lock Out Function
- 200 Search Lockouts
- 10 Priority Channels
- 10 Priority IDs per bank
- Four Service Banks - Police, Aircraft, Ham, and Marine
- Hypersearch
- Hyperscan
- Direct Search
- Key Lock
- Memory Lock
- Data Signal Skip (skips no-modulated or data signals)
- Disconnect Tone Detect (scanner tunes into data trunk channel when it receives a disconnect transmision)
- Status Bits
- Manual Acess
- Liquid Crystal Display
- Display Backlight
- Key Backlight
- BNC Antenna connector
- Memory Backup
- Programming from PC/MAC (not controlable)
- Key tones (for correct entry or different tones for errors)
Frequencies
Range (MHZ), Step (kHZ)
29-54 5 108-136.9875 12.5 137-174 5 179.75-215.75 6 216-224.9950 5 225-399.9875 12.5 400-512 6.25 806-956 12.5 (-cell) 1240-1300 12.5
Related Links
- ARC-433 software (available December 2006)
- Scancat Lite Plus
- PRO-433 Yahoo group
- Pro-433 Scanner Yahoo group
- Manual for Pro-433
Return to Radio Shack Scanners