View source for Programming the TRX-1 and TRX-2 for the Tennessee Homeland Security District 7 NXDN System

<pre>
Programming this system for the TRX-1 and TRX-2:
Program the site(s) of interest in the order shown.
Set Site Threshold Low to 50%.
Set Site Threshold High to 95%.
Set Site Dwell to 20 (2 seconds).
Set Talkgroup Delay to 20 (2 seconds).
Program the RAN code as HEX - NOT DECIMAL!!! If in doubt, leave it to "ANY".
Do NOT check NXDN-D setting.
Set Band Plan to USA.
</pre>


* Return to [[Tennessee Homeland Security District 7]]


[[Category:Tennessee Trunking Information]]
[[Category:Tennessee NXDN NEXEDGE]]
[[Category:Tennessee Regional Programming]]