Actions

Difference between revisions of "Programming the TRX-1 and TRX-2 for the Tennessee Homeland Security District 7 NXDN System"

From The RadioReference Wiki

(Created page with "<pre> Programming this system for the TRX-1 and TRX-2: Program the site(s) of interest in the order shown. Set Site Threshold Low to 50%. Set Site Threshold High to 95%. Set Site...")
 
m (updated link after target page moved)
 
(One intermediate revision by one other user not shown)
Line 10: Line 10:
 
Set Band Plan to USA.
 
Set Band Plan to USA.
 
</pre>
 
</pre>
 +
 +
 +
* Return to [[Tennessee Homeland Security District 7]]
 +
  
 
[[Category:Tennessee Trunking Information]]
 
[[Category:Tennessee Trunking Information]]
 
[[Category:Tennessee NXDN NEXEDGE]]
 
[[Category:Tennessee NXDN NEXEDGE]]
 
[[Category:Tennessee Regional Programming]]
 
[[Category:Tennessee Regional Programming]]

Latest revision as of 00:51, 17 July 2018

Programming this system for the TRX-1 and TRX-2:
Program the site(s) of interest in the order shown.
Set Site Threshold Low to 50%.
Set Site Threshold High to 95%.
Set Site Dwell to 20 (2 seconds).
Set Talkgroup Delay to 20 (2 seconds).
Program the RAN code as HEX - NOT DECIMAL!!! If in doubt, leave it to "ANY".
Do NOT check NXDN-D setting.
Set Band Plan to USA.


Retrieved from "https://wiki.radioreference.com/index.php?title=Programming_the_TRX-1_and_TRX-2_for_the_Tennessee_Homeland_Security_District_7_NXDN_System&oldid=244520"