Difference between revisions of "Sandbox"

Revision as of 21:40, 28 November 2006

Icom PCR-100

This page lists links, related pages and software support for the Icom PCR-100 receiver.

General Specifications

Icom PCR-100 Specs

Reviews and User Opinions

First Impressions of the PCR-100 on Strong Signals

Related Pages

Supporting Software

Yahoo Groups and Mailing Lists (software and receiver support)

Modifications

Discriminator

Discriminator Tap Instructions for the PCR-100

10.7 MHZ IF Output

The buffered 10.7 MHz IF Output is available at the emmiter of transistor of Q85. Q85 is located close to the edge of the large board, near J1. If you place the radio with the antenna connection to the left, Q85 is the first transisor to the right of the smaller IF filter at the top lefhand corner of the RF board. This is directly above the metal can for one of the LO's. The emmitter is the upper left terminal (if the radio is oriented as described above). There will be a DC level at this point, so will want a coupling capacitor. (Thanks to gr8amp in the forums)

Other

DRM Modifications links

eBay Listings

Back to Icom Radios

@@ Line 41: / Line 41: @@
 * [http://groups.yahoo.com/group/spectrumexplorer/ Spectrum Commander Yahoo group]
 * [http://groups.yahoo.com/group/TalkPCR/ TalkPCR Yahoo group]
-* [http://groups.yahoo.com/group/TRX-Manager/ TRX-Manager Yahoo Group]
 * [http://groups.yahoo.com/group/TrunkPCR/ TrunkPCR Yahoo group]
-* [http://mailman.qth.net/mailman/listinfo/pcr-1000 PCR-1000 group at QTH.Net]
 * [http://www.strongsignals.net/access/forums/viewforum.php?f=11 Icom Forum at Strong Signals]
 * [http://www.radioreference.com/forums/forumdisplay.php?f=84 Icom Forum at RadioReference]
-* [http://www.ham-radio.ch/forums/ Ham Radio Deluxe Forums]
 ==Modifications==