Software Support for Uniden Rebanding

From The RadioReference Wiki

Revision as of 19:54, 8 August 2009 by Ka3jjz (talk | contribs)

Please use this article to document how to enter the Rebanding changes outlined below in the various software packages that support Uniden scanners.

Band Plan Base Freq (lower) Base Freq (upper) Offset Polarity Spacing
1 851.025 854.000 440 + 25 khz
2 851.0125 868.9875 0 + 25 khz

As of this writing, the following software packages are known to support rebanding.

  • BC246.TCL for the BC246- Macs, Unix and Windows (TCL/TK) support - freeware
  • BuTel Software
    • ARC396
    • ARC996
    • ARC246 (as of version 3.1)
    • ARC15 (as of version 3)
Unknown Rebanding Support

Additional Information requested...

  • BuTel Software
    • ARC330
    • ARC250 (for the BC296 and BC796 only)
    • ARC898
    • ARC8
    • ARC-XT (for the Uniden XT DMA scanners)
  • Trunkstar All Products


Site screen with bandplan

To access this screen, change the site type to Mot Custom/Reband. If you are using the RR Trunk Import, and the rebanded flag has been turned on in the database, FreeScan automatically adds the appropriate values into the table.

Return to the Uniden DMA FAQ