Actions

Difference between revisions of "Uniden scanner test modes"

From The RadioReference Wiki

(Added Verification of some of the BCD996T Test Modes (*NOTE* It is very likely almost all BCD396T Test Modes are possible on the BCD996t/xt models))
(Add note concerning bcd396t being very similar to bcd996t/xt)
Line 4: Line 4:
  
 
In the column for each scanner model, an '''X''' will be in the row corresponding to each test verified to work for that scanner model.  If you verify that a test works for a scanner model, please update this page.
 
In the column for each scanner model, an '''X''' will be in the row corresponding to each test verified to work for that scanner model.  If you verify that a test works for a scanner model, please update this page.
 +
 +
(It is very likely almost all of the test modes verified for the BCD396T will also work on the BCD996T/XT models as well.  Again, try it and if it works, mark it as working here.)
  
 
{|border=1 cellpadding=2 cellspacing=0
 
{|border=1 cellpadding=2 cellspacing=0

Revision as of 21:00, 23 November 2011

Test modes for Uniden scanners.

To enter a test mode, hold the indicated keys while powering-on the scanner.

In the column for each scanner model, an X will be in the row corresponding to each test verified to work for that scanner model. If you verify that a test works for a scanner model, please update this page.

(It is very likely almost all of the test modes verified for the BCD396T will also work on the BCD996T/XT models as well.  Again, try it and if it works, mark it as working here.)

Test name Keys BC246T BCD396T BCD996T BCT15 BR330T SC230 BC-RH96
Backlight Test 6+9+Scan X X
Backlight Test 6+9+L/O X X X
Battery Save Tests 1+4+8 X
Battery Save Tests 1+5+8 X
Battery Save Tests 2+4+7 X
Battery Save Tests 2+4+8 X
Battery Save Tests 2+5+7 X
EEPROM Dump 1+3+L/O X X
EEPROM Dump 1+9+Hold X X X X X
EEPROM Dump 1+9+L/O X
EEPROM Dump 3+7+Hold X X X X
EEPROM Dump 3+7+L/O X
EEPROM Dump 7+9+Hold X
Firmware Version 2+5+9 X X X X X X
Firmware Version 2+6+8 X X X X
Firmware Version 2+6+9 X X X X
Firmware Version 3+5+8 X X X X
Firmware Version 3+5+9 X X X X X
Firmware Version 3+6+8 X X X X
Frequency Bands Test 0+3+Hold X X X X X X
Frequency Step Tests 1+5+9 X X X X X
Frequency Step Tests 1+6+8 X X X X
Frequency Step Tests 2+4+9 X X X X
Frequency Step Tests 2+6+7 X X X X
Frequency Step Tests 3+4+8 X X X X
Initialize Memory 2+3+L/O X
Initialize Memory (Documented) 2+9+Hold X X X X
Initialize Memory 2+9+L/O X
Initialize Memory 3+8+Hold X X
Initialize Memory 3+8+L/O X
Initialize Memory 8+9+Hold X
Key Touch Test 0+3+Scan X X X X X X
Key Touch Test (Freq. step on BCT15) 0+6+Hold X X X
LCD Pixels Test (Reverts to Key Touch Test) 0+1+9 X X X X X X X
LCD Pixels Test (Reverts to Key Touch Test) 0+3+7 X X X X X X X
LCD Pixels Test (Reverts to Key Touch Test) 2+9+.No X X X X X
LCD Pixels Test (Reverts to Key Touch Test) 3+8+.No X X X X X
Loads Test Frequencies in Memory (Freq. step on BCT15) 2+6+L/O X X X
Loads Test Frequencies in Memory 2+9+Scan X X X
Loads Test Frequencies in Memory 3+5+L/O X X X
Loads Test Frequencies in Memory 3+8+Scan X X X
Loads Test Frequencies in Memory 5+9+Hold X X
Loads Test Frequencies in Memory 6+8+Hold X X
NWR-SAME Tests (NOTE: Very Loud! Use CAUTION!) 0+1+3 X X X X X
NWR-SAME Tests (NOTE: Very Loud! Use CAUTION!) 0+3+.No X X X X
NWR-SAME Tests (NOTE: Very Loud! Use CAUTION!) 2+3+.No X X X X
On-Air Cloning Test 0+1+2 X X
On-Air Cloning Test 0+1+Func X X
On-Air Cloning Test 0+2+.No X X
On-Air Cloning Test 1+2+.No X X
RS232C Loopback Test 0+1+Hold X X
RS232C Loopback Test (Use Supplied Cable for BC-RH96) 0+.No+Hold X X X
Scan Rate Test (NOTE: Will Erase ALL Stored Systems) 1+6+L/O X
Scan Rate Test (NOTE: Will Erase ALL Stored Systems) 1+9+Scan X X
Scan Rate Test (NOTE: Will Erase ALL Stored Systems) 3+4+L/O X X
Scan Rate Test (NOTE: Will Erase ALL Stored Systems) 4+9+Hold X
Scan Rate Test (NOTE: Will Erase ALL Stored Systems) 6+7+Hold X X
Systems Tests 1+2+9 X X X X
Systems Tests 1+3+8 X X X
Systems Tests 1+8+9 X X X
Systems Tests 2+3+7 X X X
Systems Tests 2+7+9 X X X
Tone-Out Test (NOTE: Will Over-Write your Tone-Outs) Hold+Scan+L/O X

Return to the Uniden DMA FAQ