IC-R7000

This page lists links, related pages and software support for the Icom R-7000 receiver. The technical specifications can be viewed here (From the Icom website).

1 General Specifications
2 Filters and other mods
3 Reviews and User Opinions
4 Related Pages
5 Supporting Software
6 Yahoo Groups and Mailing Lists (software and receiver support)
7 eBay Listings

[edit] General Specifications

99 memories
25-1000, 1025-2000MHz range
Scan rate 8cps (max)
AM, WFM, FM, LSB, USB
100Hz; 1, 5, 10, 12.5, 25kHz steps
Priority scan
Autostore (20 channels)
Voice squelch control (VSC)
Analogue signal meter
Noise blanker (NB)
Attenuator
Wireless remote control (optional)
Tape recorder control
Computer control
Icom R-7000 Specs

[edit] Filters and other mods

[edit] Reviews and User Opinions

EHam Reviews of the R-7000

[edit] Related Pages

Universal Radio R-7000 page
Donner's Rig Control page
Icom manuals
Service manual (22MB-Pdf)
Some Tech info by LUIX (in spanish)
Here is a schematic (PDF file) for an interface used with Trunker and a Icom R7000. For this example, a PRO-43 scanner is used to obtain the data channel. The interface obtains power from the Icom, so there is no issue with weak ports not being able to power the slicer. The IC Chip used is a MAX203 for minimum parts count, but a MAX232 would work just as well. The MAX203 can be obtained from Digi-Key. This interface has also been tested with an Icom IC-R7100. This interface may also work for other radios that use TTL serial levels if another source of 9-12V is available, or 5V if the regulator is left out. (Thanks to Gene!)