Difference between revisions of "Pro-2055"
From The RadioReference Wiki
m |
Phil smith (talk | contribs) |
||
Line 1: | Line 1: | ||
− | + | [[Image:Pro2055.jpg|right|Pro-2055]] | |
− | |||
The Pro-2055 was manufactured for Radio Shack by GRE America Inc | The Pro-2055 was manufactured for Radio Shack by GRE America Inc | ||
Revision as of 00:00, 19 September 2006
The Pro-2055 was manufactured for Radio Shack by GRE America Inc
The same scanner as the Pro-97 but as a base/mobile. Trunk tracker three technology. Can use Win97 to program with your computer. Note that due to firmware limitations, computer control is not possible.
This unit can be used as a desktop scanner or mounted in a vehicle.* Alphanumeric display shows ID code or can be programmed with service name. Backlit display and keypad for low-light use. Clones with the popular PRO-97 handheld scanner (#20-527).
PRODUCT FEATURES
- Rebanding supported? YES However: it appears that the scanner must be returned to Tandy for a retrofit
- See this article on the Strong Signals website for more information
- This information pertains to the Pro-97; however it is assumed that the support will be applied in a similar manner. More information is required.
- A cloning cable may be fabricated using 2 1/8 inch mono jacks and shielded cable
• 1000-channel memory divided into ten banks lets you store up to 1000 frequencies
• 150+ most popular national frequencies preprogrammed
• Covers most popular 800MHz triple-trunking police/fire/emergency systems in most metropolitan areas
• Motorola, LTR, EDACS (GE/Ericsson) capability
• Use as a desktop scanner or mount in, under or on dash of vehicle* with included DIN-E hardware
• Signal Stalker II—searches for nearby frequency transmissions within approximately 1000 feet of the radio
• Scanner will automatically jump to nearby transmission and display frequency
• Skywarn button—hear storm reports from spotters near your location minutes before they are broadcast on TV or radio
• Skywarn requires one-time programming of one frequency into memory
• Alphanumeric display can display ID code or service name
• Backlit display and keypad
• Clones with the popular PRO-97 handheld scanner—download information on the handheld to the desktop scanner, no need to program separately
• CTCSS/DCS (Continuous Tone Coded Squelch System/Digital Coded Squelch) receive and detect
• 1 priority channel
Specifications: • Frequencies: 25-54, 108-136.99166, 137-174, 216.0025-225, 225-406, 406-512, 800-960 (except cellular), 1240-1300MHz
• FM/AM mode, user selectable
• Triple conversion
• 60-channel scan per second
• 75-step search per second
• 5, 6.26, 7.5, 8.333, 12.5, 25KHz step (preset by band - not user selectable)
• 50-frequency search skip
• Air, police-fire, Ham, Marine, WX, FRS/GMRS/MURS and CB service search
• WX and SAME alert with FIPS operation—get alerts for only your county (will not alert in SAME mode unless you have entered the FIPS code for your county)
• PC interface
• Unit-to-unit cloning
• 20dB attenuator (global or by-channel)
• Lock out, lock out review, delay and reset
• EPPROM memory backup—will not lose programming if power is lost
• Dimensions (LWH): 7.2x5.3x2.2" (18.29x13.46x5.59cm)
• Includes AC and DC adapters for desktop or vehicle* use
• Takes ADAPTAPLUG type "T" for power supply - now discontinued at Radio Shack.
Also see the Pro-97 page. All utilities and links listed there also apply to the PRO-2055.
Contents
Restoring The 155 Preset Frequencies
- 1. Turn the scanner OFF and then turn ON again.
- 2. When the Multi-system Trunking Scanner appears, press PGM.
- 3. Press 1
Software
Related Pages
- Easier to Read PRO-97/2055 Manual
- Radio Shack website statement on Rebanding
- Strong Signals GRE Message board
- Strong Signals Radio Shack Message board
- Radio Shack PRO scanners message board
- RadioReference Radio Shack forum
- Scanning Arkansas: PRO-2055 Review
Yahoo Groups and Mailing Lists (software and receiver support)
eBay Listings
Return to Radio Shack Scanners