Difference between revisions of "PSR-300/400 Operating Tips"
From The RadioReference Wiki
m |
|||
Line 8: | Line 8: | ||
*Battery Voltage - PGM, F+ENT, Manual to exit. | *Battery Voltage - PGM, F+ENT, Manual to exit. | ||
− | *Spectrum Sweeper - Press and hold The scan/spectrum sweeper key. To select public service sweep press | + | *Spectrum Sweeper - Press and hold The scan/spectrum sweeper key. To select public service sweep press F+Scan/spectrum sweeper key. Press the number to activate/de-activate band. |
− | F+Scan/spectrum sweeper key. Press the number to activate/de-activate band. | + | *Edit Welcome Message - PGM, F+Text, Enter text for 1st line, "ENT", 2nd line, "ENT", 3rd line, "ENT", 4th line, "ENT" <to exit>. |
− | *Edit Welcome Message - PGM, F+Text, Enter text for 1st line, "ENT", 2nd line, "ENT", 3rd line, "ENT", 4th line, | ||
− | "ENT" <to exit>. | ||
*Edit Bank Tag - PGM, Func+<bank number>, TEXT, enter text, ENT to save and exit. | *Edit Bank Tag - PGM, Func+<bank number>, TEXT, enter text, ENT to save and exit. | ||
− | *Backlight Settings - Turn radio on, press the light button during the "welcome" message, press up/down to change | + | *Backlight Settings - Turn radio on, press the light button during the "welcome" message, press up/down to change time in seconds. |
− | time in seconds. | ||
*Infinite Backlight - Press and hold the light button until beep in scan, manual, sweep, or search. | *Infinite Backlight - Press and hold the light button until beep in scan, manual, sweep, or search. | ||
*To turn Global attenuation on and off - F+ATT. | *To turn Global attenuation on and off - F+ATT. |
Revision as of 13:31, 26 January 2009
This article applies to the following scanners:
Please add any additional tips below. If a tip is specific to a particular scanner, please be sure to specify this in the explanation
- Battery Voltage - PGM, F+ENT, Manual to exit.
- Spectrum Sweeper - Press and hold The scan/spectrum sweeper key. To select public service sweep press F+Scan/spectrum sweeper key. Press the number to activate/de-activate band.
- Edit Welcome Message - PGM, F+Text, Enter text for 1st line, "ENT", 2nd line, "ENT", 3rd line, "ENT", 4th line, "ENT" <to exit>.
- Edit Bank Tag - PGM, Func+<bank number>, TEXT, enter text, ENT to save and exit.
- Backlight Settings - Turn radio on, press the light button during the "welcome" message, press up/down to change time in seconds.
- Infinite Backlight - Press and hold the light button until beep in scan, manual, sweep, or search.
- To turn Global attenuation on and off - F+ATT.
- Load Pre-programmed frequencies - Tun radio on, press PGM, 1 ENT, or any other key to exit. <Note: Will overwrite first three banks>.
- Keytone on/off - Press 1 to turn keytone on, or 2 to tun it off, during the welocome message.
- Review Lockouts - Press MAN, F+L/OUT. Repeate to see next L/O.
- Set WX FIPS Codes - Press WX, F+PGM, enter FIPS, press ENT. F+CL to delete FIPS.
- Program Motorola fleet maps - PGM Trunk, F+arrow up/down to select bank, F+8, enter code pressing ENT after each size code for all 8 blocks.
- Talkgroup Delay - Pess MAN, F+up/down arrow to select bank, F+TRUNK, F+./Delay, up/down arrow to select time in seconds, ENT to save.
- Re-initialize radio <and all memory> - Press 0, 1, ENT, during welcome message.