Difference between revisions of "PSR-600"
From The RadioReference Wiki
Line 64: | Line 64: | ||
*'''Verifying the firmware version''' | *'''Verifying the firmware version''' | ||
− | You can verify the version of DSP firmware currently active in the | + | You can verify the version of DSP firmware currently active in the PSR-600 by pressing the 3 key during |
the “Welcome” screen. | the “Welcome” screen. | ||
Revision as of 00:06, 23 May 2007
The PSR-600 is manufactured by GRE in China
The PSR-600 follows both digital and analog systems, including 9600bps control channel and C-QPSK modulation and P25 Conventional using NAC codes.
Also see the PSR-500 page. All utilities and links listed there also apply to the PSR-600.
Computer Control of GRE radios is now possible due to firmware enhancments.
Contents
General Specifications
Frequency Coverage
Frequency (MHz) Step Size Value --------------------------------------------- 25-54 5 kHz 108-136.9875 12.5 kHz 137-174 5, 6.25, or 7.5 kHz 216.0025-221.9975 5 kHz 222.000-225.000 5 kHz 406-512 6.25 kHz 806-823.9875 6.25 kHz 849-868.9875 6.25 kHz 894-960 6.25 kHz 1240-1300 6.25 kHz
- Rebanding supported? YES
- APCO25 Digital Audio decoding
- Trunktracks Motorola and EDACS systems
- Virtual Scanner Memory Management system stores 11 memory configurations, each with 36,000 channels and 16,000 talkgroups for a total of channels and talkgroups
- Preprogrammed for most major metropolitan areas
- 25-54, 108-174, 216-225, 406-512, 806-960, 1240-1300MHz range
- 5 ID lists, 30 IDs per list, 150 IDs per bank
- Scan rate 60 cps
- 5, 6.25, 7.5, 12.5kHz steps
- TCXO for frequency stability (?)
- Digital AGC
- Adaptive digital tracking (ADT)
- Digital signal processing (DSP)
- CTCSS/DCS abilities
- Network Access Code can be programmed to only break squelch when receiving the correct NAC in a conventional P25 system.
- 12-character alpha-tagging with text entry can show ID code or service name
- L/O ID in 'open' mode
- ID delay
- Motorola control channel only trunking
- I-Calls
- 700MHz Trunk Scanning
- Easy-to-read backlit control and display with backlit keypad
- 6 search ranges/ 1 user definable search range
- Search 'seek' feature
- Tunes virtually all important bands—local marine, fire/police, Ham, CB, VHF-air, racing, weather and more
- Weather band with SAME Weather Alert and weather priority—access weather channels and alerts with the push of a button
- 1 Priority channel
- Zeromatic search tuning
- Per channel or global attenuator
- Computer interface and Programming (not computer control)
- Function key to access special modes and programming options
- Mobile/base design with DIN-E in-dash mounting (requires separate installation kit for your vehicle)
- A cloning cable may be fabricated using 2 1/8 inch mono jacks and shielded cable
- Verifying the firmware version
You can verify the version of DSP firmware currently active in the PSR-600 by pressing the 3 key during the “Welcome” screen.
Future firmware upgrades can be installed by downloading and running an upgrade program (TBD).
Reviews and User Opinions
Related Pages
Programming Software
- WinXXX -- The best software for programming the PSR-600
Yahoo Groups and Mailing Lists (software and receiver support)
Misc
Anticipated availability in October 2007.
eBay Listings
Return to GRE Scanners