Difference between revisions of "IC-R7100"
From The RadioReference Wiki
Line 60: | Line 60: | ||
* [[R7100 Discriminator Tap Notes]] | * [[R7100 Discriminator Tap Notes]] | ||
* Here is a [http://www.radioreference.com/digital/dig/ICOMSLICER.PDF schematic] (PDF file) for an interface used with [[Trunker]] and a Icom [[IC-R7000]]. For this example, a PRO-43 scanner is used to obtain the data channel. The interface obtains power from the Icom, so there is no issue with weak ports not being able to power the slicer. The IC Chip used is a MAX203 for minimum parts count, but a MAX232 would work just as well. The MAX203 can be obtained from Digi-Key. This interface has also been tested with an Icom R7100. This interface may also work for other radios that use TTL serial levels if another source of 9-12V is available, or 5V if the regulator is left out. (Thanks to Gene!) | * Here is a [http://www.radioreference.com/digital/dig/ICOMSLICER.PDF schematic] (PDF file) for an interface used with [[Trunker]] and a Icom [[IC-R7000]]. For this example, a PRO-43 scanner is used to obtain the data channel. The interface obtains power from the Icom, so there is no issue with weak ports not being able to power the slicer. The IC Chip used is a MAX203 for minimum parts count, but a MAX232 would work just as well. The MAX203 can be obtained from Digi-Key. This interface has also been tested with an Icom R7100. This interface may also work for other radios that use TTL serial levels if another source of 9-12V is available, or 5V if the regulator is left out. (Thanks to Gene!) | ||
+ | * [http://www.swl-remotes.com/pages/13/index.htm IR Remote] | ||
==Supporting Software== | ==Supporting Software== | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
* Scannerwear (available from the [http://groups.yahoo.com/group/Icom_R-10/ Icom R-10] Yahoo group) | * Scannerwear (available from the [http://groups.yahoo.com/group/Icom_R-10/ Icom R-10] Yahoo group) | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
* [http://www.lynovation.com/ Control the Radio (Pocket PC and PC Control apps)] | * [http://www.lynovation.com/ Control the Radio (Pocket PC and PC Control apps)] | ||
− | * [ | + | * See our [[Receiver Software Applications]] article for additional support |
− | |||
− | |||
− | |||
− | |||
==Yahoo Groups and Mailing Lists (software and receiver support)== | ==Yahoo Groups and Mailing Lists (software and receiver support)== | ||
* [http://groups.yahoo.com/group/ctr-remote/ CTR-Remote Yahoo group] | * [http://groups.yahoo.com/group/ctr-remote/ CTR-Remote Yahoo group] | ||
* [http://groups.yahoo.com/group/R7100/ R7100 Yahoo group] | * [http://groups.yahoo.com/group/R7100/ R7100 Yahoo group] | ||
− | |||
* [http://www.strongsignals.net/access/forums/viewforum.php?f=11 Icom Forum at Strong Signals] | * [http://www.strongsignals.net/access/forums/viewforum.php?f=11 Icom Forum at Strong Signals] | ||
* [http://www.radioreference.com/forums/forumdisplay.php?f=84 Icom Forum at RadioReference] | * [http://www.radioreference.com/forums/forumdisplay.php?f=84 Icom Forum at RadioReference] | ||
− | |||
− | |||
− | |||
− | |||
* [http://groups.yahoo.com/group/swl_ir_remote/ SWL IR Remote Yahoo group] | * [http://groups.yahoo.com/group/swl_ir_remote/ SWL IR Remote Yahoo group] | ||
− | |||
==eBay Listings== | ==eBay Listings== |
Revision as of 16:35, 2 March 2010
This page lists links, related pages and software support for the Icom R-7100 receiver. The technical specifications can be viewed here (From the Icom website).
Contents
General Specifications
- 25-2000MHz range
- 900 channels - 9 banks
- 100Hz; 1, 5, 10, 12.5, 20, 25, 100kHz; 1MHz steps
- AM, WAM, WFM, FM, LSB, USB
- Dual scan operation
- Signal meter
- 10 search limits
- Attenuator
- Noise blanker (NB)
- AFC
- Voice squelch control (VSC)
- Autostore (100 channels)
- Clock/timer
- Computer control
- Tape recorder control
- Icom R-7100 Specs
Filters and other Mods
Setting the Output Baud Rate on R7100 Using the Keypad by Greg Knox
1. Turn power OFF
2. While pushing the following keys, turn power ON:
Baud Rate | Keys |
---|---|
9600 | ENT + 5 |
4800 | ENT + 6 |
1200 | ENT + 7 |
300 | ENT + 8 |
Reviews and User Opinions
Related Pages
- Universal Radio R-7100 page
- Javiation R-7100 page
- Donner's Rig Control page
- Radio Database International published a White Paper on this receiver which can be ordered here
- Icom manuals
- R-7100 Service manual (28MB-Pdf)
- R7100 Discriminator Tap Notes
- Here is a schematic (PDF file) for an interface used with Trunker and a Icom IC-R7000. For this example, a PRO-43 scanner is used to obtain the data channel. The interface obtains power from the Icom, so there is no issue with weak ports not being able to power the slicer. The IC Chip used is a MAX203 for minimum parts count, but a MAX232 would work just as well. The MAX203 can be obtained from Digi-Key. This interface has also been tested with an Icom R7100. This interface may also work for other radios that use TTL serial levels if another source of 9-12V is available, or 5V if the regulator is left out. (Thanks to Gene!)
- IR Remote
Supporting Software
- Scannerwear (available from the Icom R-10 Yahoo group)
- Control the Radio (Pocket PC and PC Control apps)
- See our Receiver Software Applications article for additional support
Yahoo Groups and Mailing Lists (software and receiver support)
- CTR-Remote Yahoo group
- R7100 Yahoo group
- Icom Forum at Strong Signals
- Icom Forum at RadioReference
- SWL IR Remote Yahoo group
eBay Listings
Back to Icom Radios