South Sound 911
From The RadioReference Wiki
Site NACs
Site | Site ID | Site NAC (hex) | Site NAC (dec) |
---|---|---|---|
Tacoma Simulcast | 1 | 0x1E1 | 481 |
Orting Simulcast | 2 | 0x1E2 | 482 |
South Simulcast | 3 | 0x1E3 | 483 |
West Seattle | 4 | 0x1E4 | 484 |
Buckley | 5 | 0x1E5 | 485 |
Listening with RTL-SDR and OP25
Install OP25 as per the instructions: http://op25.osmocom.org/trac/wiki.png/wiki/InstallInstructionsPage
Create a trunk.tsv
file based on the sites you can receive, their control channels, and the site NAC. Here is an example:
"Sysname" "Control Channel List" "Offset" "NAC" "Modulation" "TGID Tags File" "Whitelist" "Blacklist" "Center Frequency" "Tacoma" "774.68125,774.43125,773.93125" "-720" "0x1e1" "C4FM" "Orting" "770.35625,770.60625,773.98125,774.48125" "-720" "0x1e2" "C4FM" "South" "773.231250,773.731250" "-720" "0x1e3" "C4FM" "West Seattle" "774.706250,774.206250" "-720" "0x1e4" "C4FM" "Buckley" "773.481250,772.931250" "-720" "0x1e5" "C4FM"
TSV stands for tab-separated values. Each field in the tsv file must be separated by a single tab character. This wiki does not preserve tab characters, so you must fix it after copy and pasting.
You will need to determine the offset needed for your RTL dongle by using the fine tune slider in OP25 to line up the signal on the Datascope tab.
Here is an example command to start OP25 with the above file. You may need to change some of the arguments for your system:
./op25/op25/gr-op25_repeater/apps/scope.py --args rtl=0 -N LNA:42 -f 774081250 -S 2400000 -v 5 -2 -T trunk.tsv